DrSpeed

Sweet! Where'd you source out the strip LEDs?

Yeah, but it ain't easy lookin' cool!!!

But these are wicked forthe front turn signals...they are white in running lamp mode, and blink amber!! http://www.v-leds.com/Exterior-LED/Turn-Signal-LED/White-LED/TYPE-2-DUAL-COLOR-CHANGING-p5846227-1-2.html

There's another site that uses "v-led.com" You need to add an "S" to the "led".... http://www.v-leds.com/ That bulb image is to let you know what lamp you are replacing...kind nice I suppose to make sure you know which ones are there replacements. These new ones that they have out: http://www.v-leds.com/Exterior-LED/Brake-Light-LED/Red-LED/2-RED-1157-V-LEDS-7W-p6622388-1-2.html Those are 7 watt LEDs! http://www.v-leds.com/Exterior-LED/Turn-Signal-LED/Red-LED/V-LEDS-RED-60-M-SMT-TAILBRAKE-p5746537-1-2.html Those have 60 LEDs! If you want to go nuts... http://www.v-leds.com/Exterior-LED/Turn-Signal-LED/Red-LED/V-LEDS-RED-92-M-SMT-TAILBRAKE-p7472056-1-2.html 92 LEDs. These are nice because the tower design allows the light to come off the lamp radially, utilizing the reflectors in the housing designed for an incandescent bulb that not only shoots light directly back, but all around the sides too. See attached photos...they are in the same order as the links!

That was what I was going to recommend. Good source for some super bright LEDs: http://www.v-leds.com/ I've got them all over my pickup. The coolest ones are the front turn signals, that go from a white running lamp to an amber blinker: http://www.v-leds.com/Exterior-LED/Turn-Signal-LED/White-LED/TYPE-2-DUAL-COLOR-CHANGING-p5846227.html and these super bright reverse lamps! http://www.v-leds.com/Exterior-LED/License-Plate-LED/White-LED/V-LEDS-HIGH-POWER-18W-p7516915.html

Is that Eric Delko? http://www.watchingcsi.com/wp-content/uploads/2007/11/normal_csi-m-609_02.jpg

Is there any way to link the two (driver and passenger) side so you only have to adjust one of them? It's kind of pain to crank on both sides when you want the entire care one temperature.

No, I didn't grab anything else... No matter...the HIDs are in, and the DRLs are disabled!!!

Hey, do you know if Subuaru uses a turn signal relay for their turn signals? Or is it integrated into the PCM? I'm asking because I'd like to do LEDs for the Brake, Turn, and Parking Lamps. With the turn signals, it'll go into rapid-flash-lamp-out mode if you replace the incandescent bulbs with LEDs. I'd like to get a LED friendly relay instead of adding load resistors. If it is a relay, do you know where it is, and what's the part number?

Nice! I didn't even have to pull the panel out... thanks for doing that for us so we knew where to look. just pushed the panel up into the corner about 4 inches, shoved my ape hand in there, grabbed the connecter release, and pulled back. The wierd part is that that I plugged the connector back in, the DRL does not work any more like it's supposed to. Anyone experience that?