08Spec_B

Bump, price drop to 300 + shipping.

My Stanza V2 is up for sale. $290 shipped + paypal fees if used, located in utah. Pricing is similar to the v3 knockoffs like monster, vg tuning (and others) but much more rare and doesnt need any finish work or tinkering with fitment, plus getting the others may be tricky from russia. Paint is in pretty good shape, belive it's BSM (prefacelift silver) but can't confirm.







@DoctorDaveLGTsorry man, it has sold. I would be happy to put you on the list of people waiting for one if you would like. Let me know! 

@DoctorDaveLGTGreat questions! I came to the conclusion that most people wont want to send back their trims and pay shipping to get $40 back, and I realized I still have an extra trim set in storage. 

I will still knock off $110 and exclude the new boots if interested. There were a couple variations of the post I made depending on which group it was posted in, lgt vs spec b groups and it looks like thats the one that was copied over. 

Quote came back at $90. Just being upfront, four individuals have had shipping quotes sent out by this point. 

40 minutes ago, xt2005bonbon said:

Did you bring some EDM facelift set of HID headlights by chance?

I did not. Though i'm sure I can get some if interested. 

Bump. Updated to $200 + shipping. $85 drop from original list price

For sale, Located in UT. 

Painted EUDM LHD facelift console. These setups are very sought after since the EU was the only market to get them in the LHD variant. I have brought over about 10 of them this year and bought out all the ones my guy had. 

Includes all needed parts to swap into a usdm 08-09 legacy or outback, though 05-07 is possible. 

-Main console

-Driver and passenger kick panel

-Ash tray

-New faux leather Stitchboots ebrake and shift boots

-Rear console/ebrake cable mounting bracket

-Upgraded red LED lit cupholders like the s402 to match interior lighting

-all factory silver trims have been repainted audi monsoon gray and 2k clearcoated due to having some typical wear that didn't look great. This includes side radio trims, cupholder rings, shifter bezel ring, glovebox trim, and driver side knee panel trim. I will reimburse $40 if you send back your unbroken stock usdm glovebox and driver side small trim once you install these, nice to have spares on hand.

Price $890 + shipping

I do have an extended armrest extension cubby that can be added on for an extra $100

Those are awesome. Here's some of mine I have yet to install: jdm blue winker powerfolding mirrors with yellow prova convex lenses, corazon rear subframe brace, multicolor fogs, misc 4th gen oe/aftermarket badges (tbsti on the way), zerosports rear strut brace, sti braided brake lines. 

@Fenrir1sorry, those sold a couple days ago and I forgot to update the listing. My apologies. Listing is now up to date

JDM STI option trunk lip w/ brake light. There are two styles, one that sits on the top of the trunk and one that hangs off the back a bit more and comes down the back trunk face just a little. I always wanted this second style but could never find one. Of course once I found a stanza this pops up so it's gotta go lol.

Stucturally in good shape, just needs a repaint. The silver car is for reference.

$285 SOLD

@JoeInOregonit will bolt up to 05-09 legacy/outback. If you have 05-07 and dont plan to wire up the steering wheel controls then you can easily find the swc blanks at any junkyard since base cars didnt have them. 

@shralpHonestly I have no idea. If anything I think it would have more potential fitment issues since its wider and a bit more low profile. Unfortunately wont split front and rear on those carbon ones though, sorry man! 

More JDM/aftermarket bits for sale. 

-Cusco ALC-OS CF front and rear strut bars in great shape $400 SOLD
-Cusco aluminum rear strut bar $180
-DAMD round wheel in good shape. I will hit it with leather cleaner and conditioner before sale $340 SOLD

Shipping and paypal fees not included. 

@shralpdang that does sit high. I guess it would depend where it sits on the strut tower, if its far enough back it should be perfect but if its forward of the IAG it would likely contact. Tough to say tbh. 

Very rare Syms hood spoiler/ wiper deflector for 05-09 legacy/outbacks. Structurally its in fantastic shape with no defects. Clearcoat is failing but not a huge deal in my opinion since it would likely need to be repainted to match anyways. Mounts with 3m tape, no drilling required. 

Have included the last 3 photos for mounted reference. 

*SOLD for $400*

Shipping and 3.5% paypal fees not included.

@shralpof course. Heres a very grainy screen grab from the video showing the top clearance. Hope this helps. 

@shralp I cannot confirm 100% but I would assume so due to how far forward compared to the aos the bar sits. Heres another other angle with the STI option/IAG aos combo. This is the only other angle I have but I do have a video if you'd like to reach out via PM I could give me you my social media handles to have the video sent. 

Bunch of 4th gen parts for sale.

-S402 flexible strut bar. Great condition, STI is embossed into the center rubber joint cover rather than painted on the end of the bar. Does clear and IAG AOS with room to spare. $SOLD

-Basic STI option flexible strut bar. Great condition $225

-No name strut bar (barely clears IAG AOS) $50

-STI option door sills. Have two sets, one set is 9.5/10 condition, other set is 7/10 in my option. Has a few scratches on the metal plate inserts. $275/$225 respectively.

-Tuned by STI alcantara/suede armrest for facelift JDM or EU consoles $SOLD

-Extremely rare, blue winker jdm folding mirrors. Based on my research and talking to OGs in the community, there are 4 known sets, one green and three blue sets. Im sure there are more but thats all I've been able to find. $500

-Forged carbon skinned console and glovebox trims for 08-09 USDM consoles. Clearcoated by a local collision repair shop. $350

-JDM BP facelift tailights (I do have 3 facelift EU/JDM garnishes on the way if buyer wants to hold for a matching set) $SOLD

-Corbeau sliding driver/passenger brackets $200

Happy to provide any more specific details or pictures. Shipping and 3.5% paypal fee coverage not included.

14 minutes ago, Crazycook99 said:

Any modification needed to the bumper for the grill?

Yes, though not hard at all. Id use a dremel but ive used a pocketknife in the past lol. This grille just sold but ill have another being delivered within a week if interested. 

Few parts for sale:
-Twohot scoop (9/10 condition) $350 SOLD
-STI option door sill plates (8/10, just needs new 3m tape, I'll see if I have any laying around) $275
-JDM tablet facia (typically used for tablet installs or 4 gauges) $75 (SOLD)
-STI option flexible front strut bar (9/10 condition) $250
-USDM paddle shifter setup, can be wired into prefacelift cars with 3 wires, there are writeups for this. Does need the facelift driver side lower dash for install into 05-07. $125 (SOLD)
-JDM spec b honeycomb grille $225 (SOLD)

Shipping or paypal fees not included in price.

Recently got another shipment of jdm parts, first up on the chopping block is an extra Spec B grille. Fitment is for jdm facelift bumpers, usdm facelift bumpers (with easy modification), and I believe prefacelift jdm spec b bumper. I've also included a picture of the bumper portion that needs to be trimmed out for facelift usdm fitment. 

$250 shipped, add 3.5% to cover paypal fees (if used). 

Recieved a beautiful picture from the builder this morning! All GSC valvetrain parts and new head casings have been ordered at this point as well. 

Any idea if diffuser is wagon fitment only? 

So turns out the spoiler is a stanza V1 haha, thats why it looks similar. I though there was 2 revisions but theres actually 3. Also had the window spoiler show up. 

Paint match did not come out well but just wanted it coated before the wrap goes on. The shop I have used in the past has had worse and worse results so I'll no longer be using them.