magnetic1 Posted September 25, 2008 Share Posted September 25, 2008 To answer some questions that have come up: 1) Will work on 2.5i. Comes with the brackets needed, rotors, etc. 2) Uses the Superlite caliper. A race-proven caliper built for whatever abuse you want to throw at it. Multitude of pad options are available for street, autocross or track! Caliper is LIGHT! 3) Comes with SS lines front. Rear slightly more. 4) Fits over stock wheels. 5) Uses stock rotor size. Again, flexibility. Use our OE-style rotors, DBA4000s, or our upcoming 2-piece directional vane rotors. 6) Comes with ProSpeed GS610 premium brake fluid. Again, no skimping here. You get the one of the best and proven fluids out there. To place your pre-order today: http://www.liteswap.com/merchant2/merchant.mvc?Screen=PROD&Store_Code=L&Product_Code=LGTPBK Post any additional questions you may have here and I will answer! http://www.liteswap.com/Merchant2/graphics/00000001/lgtpbk/completekit.jpg http://www.liteswap.com/Merchant2/graphics/00000001/lgtpbk/installed.jpg http://www.liteswap.com/Merchant2/graphics/00000001/lgtpbk/installedfront.jpg Free Sonax Cleaner Deal http://www.brakeswap.com Carbotech, Hawk, PFC, DBA Rotors, Motul, Wilwood, Castrol... Great service. No bumping required ! Link to comment Share on other sites More sharing options...
botbs Posted October 23, 2008 Share Posted October 23, 2008 When will this pre-order last? I am very interested in it but I am extremely poor now. $1099 shipped ? or shipping is extra? Just went to the dealer for service today. My carbotech XP8 only have 2.6mm left for the front & 3.9mm for the rear. I went to 1 track day + 3 auto-x events only + 6000km street driving, is that normal? Link to comment Share on other sites More sharing options...
magnetic1 Posted October 23, 2008 Author Share Posted October 23, 2008 That wear rate does seem a little high, but it can vary greatly depending on your braking technique. What kind of rotors? The Pre-Order price is good until I have everything here and ready to ship. Which should be end of this week or early next. Just waiting on the Wilwood calipers to show up. Free Sonax Cleaner Deal http://www.brakeswap.com Carbotech, Hawk, PFC, DBA Rotors, Motul, Wilwood, Castrol... Great service. No bumping required ! Link to comment Share on other sites More sharing options...
magnetic1 Posted October 29, 2008 Author Share Posted October 29, 2008 Pre-Order discount good for one more day. All orders ship tomorrow. Free Sonax Cleaner Deal http://www.brakeswap.com Carbotech, Hawk, PFC, DBA Rotors, Motul, Wilwood, Castrol... Great service. No bumping required ! Link to comment Share on other sites More sharing options...
Scooby2.5 Posted December 21, 2008 Share Posted December 21, 2008 Eric What size pistons did you go with in the superlights used in the LGT kit? Didnt measure them when I put them on today and I was curious. Link to comment Share on other sites More sharing options...
magnetic1 Posted December 21, 2008 Author Share Posted December 21, 2008 Greg: They are 1.62" x 4 pistons Free Sonax Cleaner Deal http://www.brakeswap.com Carbotech, Hawk, PFC, DBA Rotors, Motul, Wilwood, Castrol... Great service. No bumping required ! Link to comment Share on other sites More sharing options...
Scooby2.5 Posted December 21, 2008 Share Posted December 21, 2008 So it must be one of these three superlites 1.62" 41,1 mm Bore 1.25" 31,8 Disc Width 120-8466-R/L 1.62" 41,1 mm Bore 1.10" 27,9 Disc Width 120-8465-R/L 1.62" 41,1 mm Bore .81" 20,6 Disc Width 120-8464-R/L Link to comment Share on other sites More sharing options...
magnetic1 Posted December 22, 2008 Author Share Posted December 22, 2008 So it must be one of these three superlites 1.62" 41,1 mm Bore 1.25" 31,8 Disc Width 120-8466-R/L 1.62" 41,1 mm Bore 1.10" 27,9 Disc Width 120-8465-R/L 1.62" 41,1 mm Bore .81" 20,6 Disc Width 120-8464-R/L I can double check warehouse tomorrow, but the part number should be on your box Free Sonax Cleaner Deal http://www.brakeswap.com Carbotech, Hawk, PFC, DBA Rotors, Motul, Wilwood, Castrol... Great service. No bumping required ! Link to comment Share on other sites More sharing options...
Scooby2.5 Posted December 22, 2008 Share Posted December 22, 2008 Makes sense Link to comment Share on other sites More sharing options...
Scooby2.5 Posted December 24, 2008 Share Posted December 24, 2008 Installed the kit on my Outback XT this weekend, here is a link: http://legacygt.com/forums/showthread.php?t=102549 Link to comment Share on other sites More sharing options...
ScoobySTi07 Posted January 17, 2009 Share Posted January 17, 2009 Have you guys thought of putting together a matching set for the rear? The Ridiculousness is no more But you can have your very own piece of it. **The Ridiculous Part Out.** Link to comment Share on other sites More sharing options...
magnetic1 Posted January 17, 2009 Author Share Posted January 17, 2009 Yes, but keeping with people's budgets in mind, I dont see many people getting rears. Plus on the performance side, you arent going to see a huge benefit. Free Sonax Cleaner Deal http://www.brakeswap.com Carbotech, Hawk, PFC, DBA Rotors, Motul, Wilwood, Castrol... Great service. No bumping required ! Link to comment Share on other sites More sharing options...
ScoobySTi07 Posted January 18, 2009 Share Posted January 18, 2009 Yes, but keeping with people's budgets in mind, I dont see many people getting rears. Plus on the performance side, you arent going to see a huge benefit.Maybe on the LGT but we Outback people could certainly use it. I understand there is some difficulty in dealing with the parking brake which would make the entire setup harder (i.e. more costly) to create. Thanks for the help though. The Ridiculousness is no more But you can have your very own piece of it. **The Ridiculous Part Out.** Link to comment Share on other sites More sharing options...
Scooby2.5 Posted January 26, 2009 Share Posted January 26, 2009 Id be interested in rears now that I have experienced the fronts. Could you get a kit made that used the stock rotor size like on the front? Link to comment Share on other sites More sharing options...
magnetic1 Posted January 26, 2009 Author Share Posted January 26, 2009 Greg, weve looked into it, but the initial setup cost is pretty big. We were going to look into it after selling some of these fronts and then putting the $ into R&D for the rears. Free Sonax Cleaner Deal http://www.brakeswap.com Carbotech, Hawk, PFC, DBA Rotors, Motul, Wilwood, Castrol... Great service. No bumping required ! Link to comment Share on other sites More sharing options...
Scooby2.5 Posted January 26, 2009 Share Posted January 26, 2009 Let me know if you do anything for the rears. Link to comment Share on other sites More sharing options...
Underdog Posted April 9, 2009 Share Posted April 9, 2009 Stock brakes are starting to squeal at 54k... I'm starting to reinvestigate brake upgrade solutions. I love the idea of being able to use stock sized rotors (don't want OEM blanks though... they get so rusty) and being able to fit them under my stock wheels (for snow tires, a definite plus vs. Brembos). "Stage 2" upgrades with pads/rotors/lines/fluid are going for $700... a couple hundred more for nice calipers might be justifiable, so how much are these going for these days? I would need to paint the rears to match though... The Crimson Dynamo Link to comment Share on other sites More sharing options...
magnetic1 Posted April 10, 2009 Author Share Posted April 10, 2009 $1299 with everything you need and you can choose from coated blank, slotted or slotted/XD. Stock wheels and lower consumable costs (pads and rotors) over Brembo. Lemme know if I can help, thanks. Free Sonax Cleaner Deal http://www.brakeswap.com Carbotech, Hawk, PFC, DBA Rotors, Motul, Wilwood, Castrol... Great service. No bumping required ! Link to comment Share on other sites More sharing options...
LowFast Posted April 10, 2009 Share Posted April 10, 2009 Magnetic1 - Any update on a rear upgrade (2 or 4 piston to work with stock disk), I would be willing to "Test" it out for you? Link to comment Share on other sites More sharing options...
socallegacy Posted July 17, 2009 Share Posted July 17, 2009 whated to see if this would clear tenzo wheels stil brembos will not with out a spacer very interrested Link to comment Share on other sites More sharing options...
magnetic1 Posted July 17, 2009 Author Share Posted July 17, 2009 No rears.... socal: PM me your wheel specs. Free Sonax Cleaner Deal http://www.brakeswap.com Carbotech, Hawk, PFC, DBA Rotors, Motul, Wilwood, Castrol... Great service. No bumping required ! Link to comment Share on other sites More sharing options...
rastat Posted September 1, 2009 Share Posted September 1, 2009 I am interested in these as well, since the Legacy disc is 30mm and the ones listed below are 31.8mm and 27.9mm then it must be the model that fits a 31.8mm Disc but are the pads usable to the end or do you have to replace them when they get 1.8mm from running out? Maybe it is a completely different model or there is something I am not understanding. Let us know what it is and give us insight on how it works. So it must be one of these three superlites 1.62" 41,1 mm Bore 1.25" 31,8 Disc Width 120-8466-R/L 1.62" 41,1 mm Bore 1.10" 27,9 Disc Width 120-8465-R/L 1.62" 41,1 mm Bore .81" 20,6 Disc Width 120-8464-R/L Link to comment Share on other sites More sharing options...
RIPjeep2002 Posted September 10, 2009 Share Posted September 10, 2009 Will this kit clear 09 stock wheels? Link to comment Share on other sites More sharing options...
magnetic1 Posted September 10, 2009 Author Share Posted September 10, 2009 Pads are useable to the end. Not sure on the 09 wheels but can make them fully refundable to you if they don't fit Free Sonax Cleaner Deal http://www.brakeswap.com Carbotech, Hawk, PFC, DBA Rotors, Motul, Wilwood, Castrol... Great service. No bumping required ! Link to comment Share on other sites More sharing options...
RIPjeep2002 Posted September 11, 2009 Share Posted September 11, 2009 Pads are useable to the end. Not sure on the 09 wheels but can make them fully refundable to you if they don't fit Can this be placed on stock rotors? Can I get these in red since my rears are painted red? my 09 wheel dimensions are..... 17x7 +55 offset. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.