mycotopian Posted August 11, 2005 Share Posted August 11, 2005 I need to have a custom setup bent up but I want to know exactly how much tubing I need to replace. I have a cobb catted DP and after that I believe it is a straight 2.5" shot through the resonator and into the Y. After it Y's into 2 I have been told it's about 1.5" is that correct? Can someone please correct my numbers here. Thanks Link to comment Share on other sites More sharing options...
edmundu Posted August 11, 2005 Share Posted August 11, 2005 Pretty spot on, although I have measured 2.44" on od diameter, and 1.89" on the y legs. Link to comment Share on other sites More sharing options...
mycotopian Posted August 11, 2005 Author Share Posted August 11, 2005 Thanks Ed Link to comment Share on other sites More sharing options...
firedawgs Posted August 12, 2005 Share Posted August 12, 2005 I thought it was 2.5" OD to a 1 7/8" at the Y Updated my vBGarage: Link to comment Share on other sites More sharing options...
Yukonart Posted August 12, 2005 Share Posted August 12, 2005 I thought it was 2.5" OD to a 1 7/8" at the Y Well, since he measured 2.44 (almost 2.5) and 1.89 (damn near 1-7/8 or 1.875) I'd say he's pretty right-on with the measurements. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.