JT_36R Posted September 13, 2015 Share Posted September 13, 2015 I just bought a 19mm rear sway bar. Curious how much of a difference it will be. I think most people who updated to a thicker rear sway bar noticed a difference right away. Going in and out of turns, the car felt more planted at least for me. Link to comment Share on other sites More sharing options...
MRLancaster Posted September 13, 2015 Author Share Posted September 13, 2015 I just hope 19mm will be a good enough difference. Link to comment Share on other sites More sharing options...
Perscitus Posted September 13, 2015 Share Posted September 13, 2015 (edited) Youll feel it. I had that setup before. Stock 2010 front, 19mm rear, then Stock 2013 front and 19mm rear. Its good, but with other suspension upgrades, the 2015 wrx 21mm would be better or a Whiteline 22mm adjustable set to 21mm. Then again, your stock front may not be 26mm, so a 19mm or the 2015 wrx oem 21mm will likely be well balanced. For the 26mm front fsb, 19mm isnt perfectly matched... but still light years better than the puny oem 16mm rear. This will help to... looks like going 16-19mm results in 99% increase in stiffness (lol) http://legacygt.com/forums/showpost.php?p=5233003&postcount=19189 Edited September 13, 2015 by Perscitus Link to comment Share on other sites More sharing options...
MRLancaster Posted September 14, 2015 Author Share Posted September 14, 2015 I may look into the 21mm WRX one down the road then. Thanks for the input. Link to comment Share on other sites More sharing options...
MRLancaster Posted September 24, 2015 Author Share Posted September 24, 2015 http://i86.photobucket.com/albums/k115/T-Ho_man/12019892_10204882116443753_3000252151624656610_n_zpsz7utszaw.jpg Link to comment Share on other sites More sharing options...
Perscitus Posted September 24, 2015 Share Posted September 24, 2015 (edited) You might like this.... 3D printed in France by yours truly. Painted with metallic sharpies. Edited September 24, 2015 by Perscitus Link to comment Share on other sites More sharing options...
MRLancaster Posted September 24, 2015 Author Share Posted September 24, 2015 Hey! You guys got the paint to work! No more bubbling I assume? Mind taking a full shot of the rear and front? Link to comment Share on other sites More sharing options...
Perscitus Posted September 24, 2015 Share Posted September 24, 2015 Check it out... Link to comment Share on other sites More sharing options...
Unsp0kn Posted September 24, 2015 Share Posted September 24, 2015 I NEED those badges. Link to comment Share on other sites More sharing options...
MRLancaster Posted September 25, 2015 Author Share Posted September 25, 2015 After I order the glove box and button shroud for the mirrors today the whole dash will be black. All I have left on the dash is the navigation head unit, and GT/Sport "Carbon Fiber" trim. Next up doors. Link to comment Share on other sites More sharing options...
MRLancaster Posted September 30, 2015 Author Share Posted September 30, 2015 http://i86.photobucket.com/albums/k115/T-Ho_man/Mobile%20Uploads/KGrHqFrUFIe8MwHNBSK3sK8j0w60_1_zpshcnglxhb.jpg Front lip ordered. Should arrive by the end of October. Link to comment Share on other sites More sharing options...
MRLancaster Posted October 11, 2015 Author Share Posted October 11, 2015 http://i86.photobucket.com/albums/k115/T-Ho_man/Mobile%20Uploads/20151010_185147_zpslkrcf2eg.jpg The front lip arrived earlier than expected. One more part down for the conversion Link to comment Share on other sites More sharing options...
MRLancaster Posted October 11, 2015 Author Share Posted October 11, 2015 http://i86.photobucket.com/albums/k115/T-Ho_man/20151011_131307_zpsls85awrt.jpg Link to comment Share on other sites More sharing options...
coppertone Posted October 11, 2015 Share Posted October 11, 2015 Nicely done, quick question are your side mirrors wrapped ? 2010 2.5GT limited is for sale. Link to comment Share on other sites More sharing options...
MRLancaster Posted October 11, 2015 Author Share Posted October 11, 2015 They are painted silver, but after the fog lights, I'll be finishing up with the Outback Special Appearance mirrors. Link to comment Share on other sites More sharing options...
s2baru Posted October 12, 2015 Share Posted October 12, 2015 I'd like to see a write up if possible once you do that conversion. Unless it's been posted already I haven't seen it or searched for it correctly. Link to comment Share on other sites More sharing options...
MRLancaster Posted October 12, 2015 Author Share Posted October 12, 2015 On the mirrors? Link to comment Share on other sites More sharing options...
s2baru Posted October 12, 2015 Share Posted October 12, 2015 Yessir. I'd appreciate it. Or mind PM'ng me a link if there already is one so we don't clutter convo in here Link to comment Share on other sites More sharing options...
MRLancaster Posted October 13, 2015 Author Share Posted October 13, 2015 I'll do a write up once I have all the pieces. Link to comment Share on other sites More sharing options...
MRLancaster Posted October 16, 2015 Author Share Posted October 16, 2015 (edited) It's getting there piece by piece. http://i86.photobucket.com/albums/k115/T-Ho_man/gallery_mainimage3_l_zpsozfo3juk.jpg Edited October 16, 2015 by MRLancaster Link to comment Share on other sites More sharing options...
MRLancaster Posted November 12, 2015 Author Share Posted November 12, 2015 (edited) Fog lights arrived and should be installed this weekend. Another update is that I will be looking into possibly running a 2015 Honda Odyssey wiper arm on the Legacy for the rear glass since it is a lower profile than the 5th gen sedan wiper. Due to not wanting to deal with importing a wiper motor at the moment, I may possibly be ordering the Outback rear wiper motor and getting a shop to make a custom mounting bracket. All I need to order now is the Outback wiper switch stalk. If the Odyssey blade is a close enough length I will go ahead and purchase that as well. http://i86.photobucket.com/albums/k115/T-Ho_man/Mobile%20Uploads/2015-honda-odyssey-rear-view_9851_119_640x480_zpsyeimwxjo.jpg Edited November 12, 2015 by MRLancaster Link to comment Share on other sites More sharing options...
ChrisCrash Posted November 12, 2015 Share Posted November 12, 2015 How are you going to mount it? On the outside of the window? Link to comment Share on other sites More sharing options...
MRLancaster Posted November 12, 2015 Author Share Posted November 12, 2015 I have the japanese glass that has the hole for the wiper. Link to comment Share on other sites More sharing options...
ChrisCrash Posted November 12, 2015 Share Posted November 12, 2015 How did you come across that? I want to do the same with mine and have searched around but still havent found one for sale. I've looked through lots of jdm websites and yahoo auctions. Link to comment Share on other sites More sharing options...
s2baru Posted November 12, 2015 Share Posted November 12, 2015 Because he's a wizard Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now