bomberlegacy Posted December 13, 2012 Share Posted December 13, 2012 I have mine installed and have the $70 usb cable they sell. The DM-6 gauge reads properly and agrees with my stock #1 o2 sensor reading in romraider. Everything is installed properly, I've checked 100x..but there is no signal output through the usb cable. Romraider reads a constant 10, and I've confirmed there is no signal. Anyone else experience this or have any suggestions? Thanks '08 Legacy 2.5i - hybrid intake - delta 1000 - E85 - magnaflow exhaust Link to comment Share on other sites More sharing options...
haycock Posted December 14, 2012 Share Posted December 14, 2012 this happens to me every once and awhile. i just close romraider, disconect cable, reconect cable, then re-open romraider and it works fine. Link to comment Share on other sites More sharing options...
Strizzy Posted December 15, 2012 Share Posted December 15, 2012 I made my own cable and never had an issue. Did you install the drivers for the USB cable? My bad luck build Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.