severedevil Posted December 14, 2011 Share Posted December 14, 2011 how bad would it be if i took the bent valves and with a block of wood or rubber mallet hammered them strait? of course im not going to do this im just wondering because i gotta wait 2weeks for a dealer to get them or 2 weeks on eBay to get them. adv auto said they stock them but they only stock 1. >.< so if possible i would deff consider. haa Link to comment Share on other sites More sharing options...
subikid90 Posted December 14, 2011 Share Posted December 14, 2011 You will never get them perfect. Try rockauto, they might have them in stock and they ship fast -Subikid90 1997 Legacy GT 5spd & EJ251 w/EJ25D heads ~10.5CR 1998 Legacy GT Limited waiting for EJ22T hybrid swap Link to comment Share on other sites More sharing options...
I Donated broknindarkagain Posted December 14, 2011 I Donated Share Posted December 14, 2011 Just buy new heads. Its easier and not very expensive. Trying to hammer your valves straight again is not a very good idea. -broknindarkagain My Current Project - Click Here COME AND TAKE IT "The only thing necessary for the triumph of evil is for good men to do nothing." Link to comment Share on other sites More sharing options...
lulzcow Posted December 14, 2011 Share Posted December 14, 2011 Yeah. Unless you've got a machine shop. But then you wouldn't be asking here. I know firsthand how hard it is to get any bent/twisted metal straight :/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.