shadowsports Posted May 22, 2011 Share Posted May 22, 2011 Searched first but could find a post about this. My AP will arrive on Thursday. Is it possible to datalog before marrying and flashing the ECU? I was hoping to use this information as a learning tool. Thanks Link to comment Share on other sites More sharing options...
STIBungy Posted May 22, 2011 Share Posted May 22, 2011 Yes. Link to comment Share on other sites More sharing options...
iNVAR Posted May 23, 2011 Share Posted May 23, 2011 Err.... are you sure? I seem to recall that when I conneced it, it immediately told me I had to marry. Link to comment Share on other sites More sharing options...
STIBungy Posted May 23, 2011 Share Posted May 23, 2011 Oh I meant datalog using Romraider. Link to comment Share on other sites More sharing options...
cryo Posted May 23, 2011 Share Posted May 23, 2011 Just flash it with a married stock mode if you want to datalog the stock map. Otherwise like invar said it will instantly give you the option to marry the unit. Dave [sIGPIC][/sIGPIC] Providing unmatched customer service and a Premium level of Dyno/E-tuning to the Community cryotuneperformance@yahoo.com facebook.com/cryotuneperformance. Link to comment Share on other sites More sharing options...
iNVAR Posted May 23, 2011 Share Posted May 23, 2011 Yeah, just do that I guess. Link to comment Share on other sites More sharing options...
COBB Tuning Posted May 24, 2011 Share Posted May 24, 2011 In order to use any of the ECU interface options like logging, data monitoring etc, you will have to install the AccessPORT. If you want to log the car in a stock state, just use the stock like maps (stage0) as this will give you an idea of how the car is behaving stock. Otherwise, get that stage1 tune on there stat! The stock tune is somewhat horrible to say the least! Travis COBB Tuning Link to comment Share on other sites More sharing options...
shadowsports Posted May 25, 2011 Author Share Posted May 25, 2011 Travis, Thanks for the "official" reply. I'll just flash to stage 1 and start there. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.