BlackGT2005 Posted February 16, 2012 Share Posted February 16, 2012 nice mine is so bad lol thxs. Link to comment Share on other sites More sharing options...
ThreethousandGT Posted July 12, 2012 Share Posted July 12, 2012 I did this today, and it was simple. It looks good. I wish the stock tips stuck out a little more, so they would be flush with the bumper. Link to comment Share on other sites More sharing options...
Later_rex Posted July 13, 2012 Share Posted July 13, 2012 do you get vibrations? Link to comment Share on other sites More sharing options...
Later_rex Posted July 13, 2012 Share Posted July 13, 2012 do you get vibrations Link to comment Share on other sites More sharing options...
theflystyle Posted July 14, 2012 Share Posted July 14, 2012 There was some slight vibrations after the install but it seems to have settled down. The vibrations were from this mod preventing the hangers from doing part of their jobs. Link to comment Share on other sites More sharing options...
bnav Posted July 19, 2012 Share Posted July 19, 2012 i might have to take 20 minutes out of my day to do this... Link to comment Share on other sites More sharing options...
fullmonte77 Posted July 19, 2012 Share Posted July 19, 2012 Did this last week.My drivers side hung like an inch lower than the pass side.It was driving me nuts!They are nice and even now.Did have some vibrations but they have gone away for the most part. Link to comment Share on other sites More sharing options...
chaz517 Posted October 21, 2012 Share Posted October 21, 2012 Old post i know, but wow this helped me so much w my aftermarket cbe, thanks so much Link to comment Share on other sites More sharing options...
sconnierider Posted October 21, 2012 Share Posted October 21, 2012 Doubt it would melt unless it made contact. Lots of airflow when moving. Unless I guess, if you we're idling for a LONG time maybe. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.