xero287 Posted February 27, 2011 Share Posted February 27, 2011 Hey everyone, I have a set of 06 lgt struts that im putting in my 05 lgt. I cannot seem to fit all three studs of the top hat into the holes in the body of the car. The most I can get is 2 out of 3. I was wondering if the 06 and 05 have very VERY slightly different top hats. I can swap out my top hats onto the 06 struts (reason being because the 06 struts have better springs on them), but I dont know where to go to do this for cheap. I started this at 11 am this morning so one can only imagine my dismay. Thanks,Riyaad Link to comment Share on other sites More sharing options...
mwiener2 Posted February 27, 2011 Share Posted February 27, 2011 you fail at posting My Mods List (Updated 8/22/17) 2005 Outback FMT Running on Electrons Link to comment Share on other sites More sharing options...
BAC5.2 Posted February 27, 2011 Share Posted February 27, 2011 12 hours? [URL="http://legacygt.com/forums/showthread.php/proper-flip-key-interesti-159894.html"]Flip Key Development Thread[/URL] "Genius may have its limitations, but stupidity is not thus handicapped." - E. Hubbard Link to comment Share on other sites More sharing options...
Osei Posted February 27, 2011 Share Posted February 27, 2011 If your top hat is orientatated correctly, just put a jack under the knuckle, and jack it up until you get enough of the threads to catch. O. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.