Jump to content
LegacyGT.com

new EWG UpPipe from CNT. 38mm and 44mm v-band. With PIX


m sprank

Recommended Posts

The New, as in initial release, CNT EWG v-band UpPipes. 38mm and 44mm available.

 

All Stainless Steel construction. Internally lined flex section. Dump tube included. Comes with gaskets and studs.

 

I currently run a 38mm GrimmSpeed EWG. Retail price is over $300. I removed my GS pipe, so I could take side by side pix with the CNT.

 

No hiding here. You can see what you are getting.

 

Might not be 100% as nice as the GS. But it is 1/2 the price!

 

pix of the 38mm version and dump tube.

 

http://legacygt.com/forums/attachment.php?attachmentid=93614&stc=1&thumb=1&d=1292628049 http://legacygt.com/forums/attachment.php?attachmentid=93615&stc=1&thumb=1&d=1292628049 http://legacygt.com/forums/attachment.php?attachmentid=93616&stc=1&thumb=1&d=1292628049 http://legacygt.com/forums/attachment.php?attachmentid=93617&stc=1&thumb=1&d=1292628049 http://legacygt.com/forums/attachment.php?attachmentid=93618&stc=1&thumb=1&d=1292628049

 

http://legacygt.com/forums/attachment.php?attachmentid=93619&stc=1&thumb=1&d=1292628049 http://legacygt.com/forums/attachment.php?attachmentid=93620&stc=1&thumb=1&d=1292628049 http://legacygt.com/forums/attachment.php?attachmentid=93621&stc=1&thumb=1&d=1292628049 http://legacygt.com/forums/attachment.php?attachmentid=93622&stc=1&thumb=1&d=1292628049 http://legacygt.com/forums/attachment.php?attachmentid=93623&stc=1&thumb=1&d=1292628049

 

 

more pix of the 38mm ewg

 

http://legacygt.com/forums/attachment.php?attachmentid=93624&stc=1&thumb=1&d=1292628111 http://legacygt.com/forums/attachment.php?attachmentid=93625&stc=1&thumb=1&d=1292628111 http://legacygt.com/forums/attachment.php?attachmentid=93626&stc=1&thumb=1&d=1292628111 http://legacygt.com/forums/attachment.php?attachmentid=93627&stc=1&thumb=1&d=1292628111 http://legacygt.com/forums/attachment.php?attachmentid=93628&stc=1&thumb=1&d=1292628111

Link to comment
Share on other sites

  • 3 years later...

Question on the normal CNT Uppipe? It has a place for the EGT sensor, but when installed the sensor does not tighten correctly since there is no flange inside the bung to push up the two piece portion of the sensor. Second question do I even need this sensor for the car to run right?

 

Thanks,

Jim

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

Terms of Use