Legacy Wagon Posted March 15, 2010 Share Posted March 15, 2010 This is for my 98 2.5RS. I'd appreciate any help you guys could give. The issue is that the inside rail closest to the car body is falling off track when I roll it back down. It wont keep a consistent pressure on the rail itself so when it gets about halfway down it seems to just fall off the track and slant. You have to line it up on the track again to get it back up. Pics related: Here's the window a good portion of the way up sitting contentedly on the track http://www.rs25.com/forums/images/smilies/biggrin.gif http://img.photobucket.com/albums/v195/TetsuoShima/1.jpg Here's an up close shot of how it should look all the way down the track: http://img.photobucket.com/albums/v195/TetsuoShima/11.jpg Here's a picture of it starting to get depressed and lose hope for it's quite purposeful existence: http://img.photobucket.com/albums/v195/TetsuoShima/3.jpg And lastly..."Goodbye, cruel world" http://img.photobucket.com/albums/v195/TetsuoShima/22.jpg Anyone have any idea of a way I can get the frame to continue to stay on the rails? Initially I tried a wire, but unfortunately it wont roll all of the way up if anything is in front of the rail since it will get caught on the top part of the rail since it's protruding slightly. Let me know if you need any more pictures, but I'm pretty sure you should get the gist of it from these. Thanks guys http://www.rs25.com/forums/images/smilies/biggrin.gif Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.