Regal05LGT Posted April 4, 2009 Share Posted April 4, 2009 I just put some wheels on (work emotion cr kai 18x7.5 +42) and I am rubbing the fender on the driver side......this led me to realize that my driver side front sits a good almost half inch lower than my passenger side. WTF? Any ideas what could cause that? Koni/swift btw Link to comment Share on other sites More sharing options...
Regal05LGT Posted April 5, 2009 Author Share Posted April 5, 2009 Could the top hat have dry rotted or something maybe? Link to comment Share on other sites More sharing options...
JonLGT Posted April 5, 2009 Share Posted April 5, 2009 Probably not. I had tein springs and my passenger side was lower than my drivers side. Where are you rubbing at? Fender or splash guard? Link to comment Share on other sites More sharing options...
MDork Posted April 5, 2009 Share Posted April 5, 2009 how much do you weigh? :lol: Link to comment Share on other sites More sharing options...
peteyjr Posted April 5, 2009 Share Posted April 5, 2009 I have swifts as well and have rubbing issues (not too bad ) with only the drivers side front . 225/45/18 tires. I only weigh 150 pounds but it must account for something. Link to comment Share on other sites More sharing options...
Regal05LGT Posted April 5, 2009 Author Share Posted April 5, 2009 I am rubbing on the fender itself, I weigh roughly 235 lol (maybe that's it) I think I am going to just do a slight fender roll to eliminate the issue....I'm doing brakes tomorrow anyway...prob pull the strut/spring assembly out n make sure everything is good while the car's up anyway Link to comment Share on other sites More sharing options...
MDork Posted April 5, 2009 Share Posted April 5, 2009 probably just a result of the +42 offset. where are the freakin pics?????? Link to comment Share on other sites More sharing options...
vicmarsal Posted April 5, 2009 Share Posted April 5, 2009 ^^+1 Link to comment Share on other sites More sharing options...
Regal05LGT Posted April 6, 2009 Author Share Posted April 6, 2009 Holy install day today.....just finished it is dark, pics hopefully tomorrow.....ended up getting front h techs and leaving the rear swift (it sits perfectly level!!!) random I know, but it works, will update 2morrow Link to comment Share on other sites More sharing options...
boostsr20 Posted April 6, 2009 Share Posted April 6, 2009 If camber is off from one side to the other it will give change ride height appearance. Link to comment Share on other sites More sharing options...
Regal05LGT Posted April 6, 2009 Author Share Posted April 6, 2009 Everything is g2g now, the guys who aligned my car were retarded lol..I'll post pics tomorrow Link to comment Share on other sites More sharing options...
vicmarsal Posted April 6, 2009 Share Posted April 6, 2009 Yay!! Link to comment Share on other sites More sharing options...
Regal05LGT Posted April 6, 2009 Author Share Posted April 6, 2009 http://i51.photobucket.com/albums/f381/NKB46/downsized_0406090810a.jpg http://i51.photobucket.com/albums/f381/NKB46/downsized_0406090811.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.