highlander Posted July 24, 2008 Share Posted July 24, 2008 Just verifying the noises in my car are 'normal'. Hear gear chatter/whine, especially in 2-3-4, when decelerating. Hear a high pitched hum at about 105MPH in 5th. I have no driveability issues, just these changes in NVH. Thought about running thicker gear oil to help, but with the common resevoir of front and center diffs sharing the tranny oil, wasn't sure that would help or hurt. Vir Est Fatum Ut Perficio Concepta Suus Progenies. - Man is destined to fulfill the capacity of his lineage (i.e. Darwinism) Link to comment Share on other sites More sharing options...
qikslvr Posted July 29, 2008 Share Posted July 29, 2008 MY LWFW created a lot of extra noise. I get a growl when deceloratig in pretty much all gears until the RPMs drop below 2K. Not sure on the 105MPH wine as I don't cruise at that speed very often. SO ya, all the noises you are hearing are basically "normal" for an aftermarket clutch and LWFW. Let's kick this pig! Link to comment Share on other sites More sharing options...
HansGT Posted July 29, 2008 Share Posted July 29, 2008 don't drive 105mph. Link to comment Share on other sites More sharing options...
bigb3630123 Posted July 29, 2008 Share Posted July 29, 2008 either go less than 105 or your just gonna have to drive a little faster than what your comfortable with like 130. Noise should smooth out by there..... Link to comment Share on other sites More sharing options...
highlander Posted July 31, 2008 Author Share Posted July 31, 2008 Ok, Ok..... the top speed isn't a frequent thing. It was a medical emergency on a divided high speed road with no traffic (and a police escort... it's good to be on the team.) I didn't know if any others here that have track days have heard a similar high pitched harmonic from the LWFW. I'll shoot for 130-160 on the next run. Vir Est Fatum Ut Perficio Concepta Suus Progenies. - Man is destined to fulfill the capacity of his lineage (i.e. Darwinism) Link to comment Share on other sites More sharing options...
blackfang Posted July 31, 2008 Share Posted July 31, 2008 I was going to say Todd, who the hell where you chasing or responding to. [SIZE=1][URL="http://public.fotki.com/blackfang/"]Pics[/URL] [B]08 KawasakiZZR 600- exhaust and other mods 98 Camaro Z/28 HT- some mods......street/strip car 07 Legacy 2.5i- SPT exhaust...daily driver[/B][/SIZE] Link to comment Share on other sites More sharing options...
CwhillVT Posted September 4, 2008 Share Posted September 4, 2008 I Just got the ACT clutch and lwfw kit. It didnt come with the bolts for the pressure plate to the flywheel- does anyone know what the p/n for those are? Are they the same as used for the stock clutch and fw? Flywheel to crank bolts I am guessing are the same as stock. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.