JSurretsky Posted February 19, 2008 Share Posted February 19, 2008 I am the owner of a 2007 5EAT. I reflashed to Stage 1 rev 1.00 when I first got my AP back in January. Right after the reflash, I had trouble starting the car. I had to hold the ignition key down until the car finally "turned over". Just today, I reflashed to Stage 1 rev 1.01 and had the same issue. Has anyone had this issue and/or can offer any insight here? Thanks. Link to comment Share on other sites More sharing options...
eldiablo Posted February 19, 2008 Share Posted February 19, 2008 completely normal My VB Garage... Pumping the air back into despair Link to comment Share on other sites More sharing options...
SeeeeeYa Posted February 19, 2008 Share Posted February 19, 2008 I am the owner of a 2007 5EAT. I reflashed to Stage 1 rev 1.00 when I first got my AP back in January. Right after the reflash, I had trouble starting the car. I had to hold the ignition key down until the car finally "turned over". Just today, I reflashed to Stage 1 rev 1.01 and had the same issue. Has anyone had this issue and/or can offer any insight here? Thanks. Normal behavior. Wait until the gauges stop sweeping before going from on to start. The ECU is learning during this time and will not start until it is done. Link to comment Share on other sites More sharing options...
Infamous1 Posted February 19, 2008 Share Posted February 19, 2008 Right just turn the ignition to on for a few seconds then turn over. This happens after any base map flash. Link to comment Share on other sites More sharing options...
JSurretsky Posted February 19, 2008 Author Share Posted February 19, 2008 That's all I need to hear -- thanks! Link to comment Share on other sites More sharing options...
2005garnetGT Posted February 19, 2008 Share Posted February 19, 2008 whats actually happening is the ECU is running a DBW self-check Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.