legacy4me Posted October 15, 2006 Author Share Posted October 15, 2006 I didn't install my lights, so I have no idea how to flip them or rotate them. I will do a search to see what I need to do. also, do I need to disconnect the battery, or anything safety wise? I feel this is a dumb question, but then again, I have no clue what im doing. Link to comment Share on other sites More sharing options...
legacy4me Posted October 16, 2006 Author Share Posted October 16, 2006 I have spoke to an online HID vendor who has informed me that my lights should not be doing this and that my kit the bulbs are possibly defective. Anyone agree? Link to comment Share on other sites More sharing options...
The B4 Posted October 16, 2006 Share Posted October 16, 2006 I have spoke to an online HID vendor who has informed me that my lights should not be doing this and that my kit the bulbs are possibly defective. Anyone agree? seeing as how some other members have had the same problem... i think that you just need to aim the bulbs correctly... unless they can't be aimed correctly because they are defective. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
lookslikeanevo Posted October 16, 2006 Share Posted October 16, 2006 I have spoke to an online HID vendor who has informed me that my lights should not be doing this and that my kit the bulbs are possibly defective. Anyone agree? consider it that you have now spoken to two, and ill try to post a picture of what you need to do tonight Current:MY05 SWP wagon - 253/290 UP, AEM CAI, Invidia Q300, tuned@yimisport OLD: MY06 GRP - 274/314 Link to comment Share on other sites More sharing options...
legacy4me Posted October 16, 2006 Author Share Posted October 16, 2006 consider it that you have now spoken to two, and ill try to post a picture of what you need to do tonight Thank you. i appreciate the help. Link to comment Share on other sites More sharing options...
n888aw Posted February 13, 2008 Share Posted February 13, 2008 Has there been anything resolved about this issue, i am having the same black line in my HIDs but i cant rotate them. is there cutting involved? Link to comment Share on other sites More sharing options...
MiniStiGuy Posted February 18, 2008 Share Posted February 18, 2008 its the return wire on the bulb. its been said allready what needs to be done. Rotate the bulb until the return wire is at the 6o-clock position. you most likely will need to cutoff/sandoff/whatever the plastic tab to make the mount fully round so that you can turn it and mount it flush again. OEM HID's Rx330 Retro Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.