bmorrisj Posted July 20, 2006 Share Posted July 20, 2006 i used Dupli*Color gray primer and Dupli*Color metal specks... for comparison i used the removable piece next to the pass. side foglight http://img.photobucket.com/albums/v34/bmorrisj/Legacy%20Meets/parts/S3010614.jpg Link to comment Share on other sites More sharing options...
rallispec Posted July 20, 2006 Share Posted July 20, 2006 hard to tell from the picture - but it looks like a good match. ANy more pictures of the finished product? Link to comment Share on other sites More sharing options...
CasopoliS Posted July 20, 2006 Share Posted July 20, 2006 subs for more pics even though this does not pertain to my ABP Link to comment Share on other sites More sharing options...
itsme Posted July 20, 2006 Share Posted July 20, 2006 Try gunmetal metalic it a better match for the grill. That what I used to repaint my grill. The top is fact. color and the inside is a repaint. You can get the paint from pep boys. Racer X FMIC for '05-'09 LGTs, '08+ WRX and '10+ LGT,'14+ FXT, and '15+ WRX TMIC Racerxengineering.com Link to comment Share on other sites More sharing options...
BrownBoy Posted July 20, 2006 Share Posted July 20, 2006 Try gunmetal metalic it a better match for the grill. That what I used to repaint my grill. The top is fact. color and the inside is a repaint. You can get the paint from pep boys. He's talking about matching the body paint...but yeah..that is a good match. As for the OP, I think there is too much metal in the paint used for the grille. It might be close, but will definately be off when attached to the car; at least I believe so. Post up those pics of the grille on the car for us to see. Link to comment Share on other sites More sharing options...
bmorrisj Posted July 20, 2006 Author Share Posted July 20, 2006 its still really rough.... its my first time working with bondo/body filler so im gonna re-do the bondo... what mesh did you guys use? and how did you attach it... Link to comment Share on other sites More sharing options...
itsme Posted July 20, 2006 Share Posted July 20, 2006 I had to do mine twice. Just use a sanding block and when you get it close to flush use a higher grit to smooth it out. Racer X FMIC for '05-'09 LGTs, '08+ WRX and '10+ LGT,'14+ FXT, and '15+ WRX TMIC Racerxengineering.com Link to comment Share on other sites More sharing options...
Hanger Posted July 20, 2006 Share Posted July 20, 2006 will i see both of you at the next meet? OT ○ ○ ○ Instagram: itshangertime :spin: ○ ○ ○ Link to comment Share on other sites More sharing options...
subastyle Posted July 21, 2006 Share Posted July 21, 2006 Or you just get them done right and have subastyle do them.....lol Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.