LMBelo Posted October 8, 2021 Share Posted October 8, 2021 (edited) Hi, guys. Time for wire harness has come. Got into troubles setting up ECM to MT. Which pin shold I jump/ground in? Which connectors is related to neutral position and back lights? * My TCM is within the ECM, not a separated part. Someone to help? Edited October 8, 2021 by LMBelo Link to comment Share on other sites More sharing options...
doublechaz Posted October 9, 2021 Share Posted October 9, 2021 All my reference material is for 95 which is a weird transition year between OBDI and OBDII so it won't match what you have. The Factory Service Manual has what you are looking for and is out there for download. Link to comment Share on other sites More sharing options...
LMBelo Posted October 11, 2021 Author Share Posted October 11, 2021 All my reference material is for 95 which is a weird transition year between OBDI and OBDII so it won't match what you have. The Factory Service Manual has what you are looking for and is out there for download. Hi. I've found a similar manual. On this gen ECU, when the automatic transmission connectors are disconnected, the ECU automatically sets to manual. So far, it only requires the neutral jump. Link to comment Share on other sites More sharing options...
doublechaz Posted October 12, 2021 Share Posted October 12, 2021 Nice! Mine came with the correct trans in the first place so I never looked at it very hard, but I think you have to ground a pin to disable the slush box function on the 95. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now