shralp Posted October 15, 2020 Share Posted October 15, 2020 (edited) FOR SALE - Portland, OR EJ25 short block for build SOLD MODS PLEASE CLOSE This was taken out of my 2008 Subaru Outback XT with 63,000 miles after spinning a rod bearing. EJ25, 2.5L turbo motor, 703 series casting. A good candidate for those looking to rebuild a motor. Still has good factory crosshatch in the cylinders and appears to be in good shape otherwise. Trying to shed some parts, I'm running out of room to store them Will not ship but will travel within 30 'ish miles of Portland to meet up if preferred. Also head to Seattle from time to time. Edited October 18, 2020 by shralp Link to comment Share on other sites More sharing options...
boxkita Posted October 16, 2020 Share Posted October 16, 2020 heh-heh, i got storage for that . might even have some dollars for it too Build my car Boxkita Track days Link to comment Share on other sites More sharing options...
Pleides Posted October 16, 2020 Share Posted October 16, 2020 (edited) Hey, you and me both! Edited November 30, 2020 by Pleides Link to comment Share on other sites More sharing options...
pdXammo Posted October 16, 2020 Share Posted October 16, 2020 I'll trade you something if Boxkita doesn't end up wanting it. Link to comment Share on other sites More sharing options...
shralp Posted October 16, 2020 Author Share Posted October 16, 2020 I'll trade you something if Boxkita doesn't end up wanting it. Let me know, still need to source a Nameless mid and y so could do the SB + cash or something else that you may have? Link to comment Share on other sites More sharing options...
rhino6303 Posted October 17, 2020 Share Posted October 17, 2020 Let me know, still need to source a Nameless mid and y so could do the SB + cash or something else that you may have? I don't want to stray you away from the nameless mid/y...but it really only fits well with their mufflers. I have the mid/y and used 6 different (yes, 6) and the fit was off for all but the nameless mufflers. 5 of the 6 fit fine with my ebay midpipe prior to the upgrade. Here were the 6: 1. Nameless 4" mufflers-great fit 2. TurboXS mufflers-mediocre fit (tips close to bumper) 3. JDM corazon mufflers-bad fit (tips actually melted bumper) 4. JDM Prova mufflers-poor fit (tips really close to bumper) 5. Oem mufflers-mediocre fit 6. Nameless 5" mufflers-best fit and current. I had to buy these to replace the Prova mufflers. Link to comment Share on other sites More sharing options...
shralp Posted October 17, 2020 Author Share Posted October 17, 2020 I don't want to stray you away from the nameless mid/y...but it really only fits well with their mufflers. I have the mid/y and used 6 different (yes, 6) and the fit was off for all but the nameless mufflers. 5 of the 6 fit fine with my ebay midpipe prior to the upgrade. Here were the 6: 1. Nameless 4" mufflers-great fit 2. TurboXS mufflers-mediocre fit (tips close to bumper) 3. JDM corazon mufflers-bad fit (tips actually melted bumper) 4. JDM Prova mufflers-poor fit (tips really close to bumper) 5. Oem mufflers-mediocre fit 6. Nameless 5" mufflers-best fit and current. I had to buy these to replace the Prova mufflers. Oh man please don’t say that we’re pretty limited with choices for mid / Y pipes so when my 12 yr Perrin unit finally gives up the ghost I’m going to have to do something. I need to find someone that has tried a Nameless with Prodrive muffs... Link to comment Share on other sites More sharing options...
rhino6303 Posted October 17, 2020 Share Posted October 17, 2020 Oh man please don’t say that we’re pretty limited with choices for mid / Y pipes so when my 12 yr Perrin unit finally gives up the ghost I’m going to have to do something. I need to find someone that has tried a Nameless with Prodrive muffs...The mid/y is truly a beautiful piece and itself fits well. I was never sure why my mufflers didn't fit well. The driver side was always the one that was off. It was frustrating. You're in Portland? I'm only 20 miles north. I may be able to help out with a pro drive test fit. Link to comment Share on other sites More sharing options...
shralp Posted October 17, 2020 Author Share Posted October 17, 2020 The mid/y is truly a beautiful piece and itself fits well. I was never sure why my mufflers didn't fit well. The driver side was always the one that was off. It was frustrating. You're in Portland? I'm only 20 miles north. I may be able to help out with a pro drive test fit. Nice, will take you up on it when this Perrin unit finally craps out Link to comment Share on other sites More sharing options...
rhino6303 Posted October 17, 2020 Share Posted October 17, 2020 Nice, will take you up on it when this Perrin unit finally craps out Absolutely. The only other mid I've even seen is the TurboXS. That would fit well most likely. Link to comment Share on other sites More sharing options...
shralp Posted October 17, 2020 Author Share Posted October 17, 2020 Absolutely. The only other mid I've even seen is the TurboXS. That would fit well most likely. Didn't think about the Turbo XS, would love to talk with someone running this to see how fitment is. Their products typically are good build quality. I see they don't have a resonator in the mid so wonder how that would affect exhaust note and/or drone. Link to comment Share on other sites More sharing options...
boxkita Posted October 17, 2020 Share Posted October 17, 2020 why not get the full nameless system? what about the mufflers don't you like? I was looking at the turbo back before the car died years ago Build my car Boxkita Track days Link to comment Share on other sites More sharing options...
shralp Posted October 17, 2020 Author Share Posted October 17, 2020 why not get the full nameless system? what about the mufflers don't you like? I was looking at the turbo back before the car died years ago Never letting go of these Prodrives. Like never... Link to comment Share on other sites More sharing options...
pdXammo Posted October 17, 2020 Share Posted October 17, 2020 hit it with a torch and reorient. It'll pull whichever side you hit it on as it cools. Link to comment Share on other sites More sharing options...
shralp Posted October 17, 2020 Author Share Posted October 17, 2020 hit it with a torch and reorient. It'll pull whichever side you hit it on as it cools. Yup, I'd rather not have to do a bit of tweaking but if need be thats acceptable Link to comment Share on other sites More sharing options...
boxkita Posted October 17, 2020 Share Posted October 17, 2020 isn't nameless near you? ask them to customize one for you? or that place rhino used? Build my car Boxkita Track days Link to comment Share on other sites More sharing options...
shralp Posted October 17, 2020 Author Share Posted October 17, 2020 yeah they are just up the road so I could have a chat with them on it as well Link to comment Share on other sites More sharing options...
boxkita Posted October 17, 2020 Share Posted October 17, 2020 see if they remake your prodrives Build my car Boxkita Track days Link to comment Share on other sites More sharing options...
pdXammo Posted October 20, 2020 Share Posted October 20, 2020 Yup, I'd rather not have to do a bit of tweaking but if need be thats acceptable It's no big deal, it's how you do. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now