Grnlantern1 Posted June 7, 2020 Share Posted June 7, 2020 Not this year at least. If I do upholstery it will be costly cuz I will need to replace the bottom of the seats with black, then door panels as well. So maybe next year I’ll see if it’s in budget. I’d consider showing my car if I did. Deff not showing it w my seat covers. I’m gonna look into those seatbelt covers you got though they look great. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...If you have cloth seats look at Katzkins they make some bad ass leather kits.. Sent from my SM-G988U using Tapatalk Link to comment Share on other sites More sharing options...
KJS2023 Posted June 7, 2020 Author Share Posted June 7, 2020 Thanks for the tips guys I guess I’ll deff be standing first. For the covers that site is awesome I wonder what the cost would b though. A 2 tone black blue would be sick. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come... Link to comment Share on other sites More sharing options...
KJS2023 Posted July 23, 2020 Author Share Posted July 23, 2020 Just got the car back from getting tints 35%. Sadly the glair from the sun makes for a bad pic. Link to comment Share on other sites More sharing options...
KJS2023 Posted September 18, 2020 Author Share Posted September 18, 2020 Final solution to my alternator wine added a noise filter to the loc with its own ground then another to the power of the oem headunit. Took my ground loop isolators off they were ruining my mids. Now no noticeable wine whatsoever instead now I just have a little white noise when no music plays. Another tune should fix that. I did break out my bd meter I can hit 116db with my current tune. This is the filter If anyone else had my issue Pipeman's Installation Solution... https://www.amazon.com/dp/B07NPF6KVL?ref=ppx_pop_mob_ap_share ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come... Link to comment Share on other sites More sharing options...
KJS2023 Posted May 2, 2021 Author Share Posted May 2, 2021 Today I took apart the rear deck found the trunk light leads. Then connected them to a lead connecting an led dimmer to my infinity display. Now the leds will light up when the trunk opens and they won’t be so blinding. I’ll prob have to tweak the dimmer once it gets dark to know. Incase anyone needs to know the trunk light has a yellow (ground) and orange (positive) wire. https://i.imgur.com/ufbIWMl.mp4 ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come... Link to comment Share on other sites More sharing options...
KJS2023 Posted May 8, 2021 Author Share Posted May 8, 2021 Just added a rear bumper diffuser ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come... Link to comment Share on other sites More sharing options...
DougKelly20 Posted May 8, 2021 Share Posted May 8, 2021 Looks great! How about some laminix on those tail lights!? Link to comment Share on other sites More sharing options...
KJS2023 Posted May 9, 2021 Author Share Posted May 9, 2021 (edited) Thanks I’ve never been into smoking the tails on my cars tryen to keep it low key enough on the outside so I don’t get the wrong attention especially during spirited driving…. Been painting some stuff for weeks now for a few add ons once I’m done I’ll be posting some pics of what I’m doing might start clear coat Monday…. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come... Edited May 9, 2021 by KJS2023 Link to comment Share on other sites More sharing options...
KJS2023 Posted May 22, 2021 Author Share Posted May 22, 2021 Finished painting and installing my old door switch’s used Subaru world rally blue then clear coated been a few weeks for the project wanted to ensure the coats dried well b4 install. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now