darkstarxi Posted May 18, 2019 Share Posted May 18, 2019 (edited) AVO S1B07G41BBLKJ turbo inlet for 07-09 Legacys with the VF46 Can anyone tell me the correct hose clamp sizes for each end? Looking to upgrade to Breeze Liner clamps and don't want to have to take it apart before ordering to measure. Thank you! Edited May 18, 2019 by darkstarxi Link to comment Share on other sites More sharing options...
Notorious Posted May 18, 2019 Share Posted May 18, 2019 You’re going to want a 2.5 or 2.75 inch clamp. Stock size is 2.4 I believe but the Avo is a tad thicker. Either one should work, you’d just have to tighten the 2.75 more in the little space you have down there. Link to comment Share on other sites More sharing options...
darkstarxi Posted May 19, 2019 Author Share Posted May 19, 2019 I see you drive an '05 LGT. Doesn't that have a VF40, rather than a VF46? Do the two turbos have the same inlet diameter? The AVO is significantly thicker than the OE inlet. I believe it's known to be the thickest of all the aftermarket inlets. Also, I'm looking for the size of the clamps at both ends of the inlet, if anybody knows. Link to comment Share on other sites More sharing options...
Notorious Posted May 19, 2019 Share Posted May 19, 2019 Same inlet diameter between the VF40/46/52, I’m actually running a VF52 on the stock inlet. Link to comment Share on other sites More sharing options...
JoeInOregon Posted October 16, 2021 Share Posted October 16, 2021 You should buy my AVO intake with box , and AVO BPV and intercooler I'm about to post have a whole AVO set under good ^_^ Sent from my Pixel 3a using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now