TylerHartman Posted May 31, 2017 Author Share Posted May 31, 2017 Mine were fine. How many miles have you put on them? I really want to go that route since I'll end up with the fancy arms. Link to comment Share on other sites More sharing options...
TylerHartman Posted May 31, 2017 Author Share Posted May 31, 2017 (edited) Step one remove seats + Carpet http://i.imgur.com/LsZKT7Y.jpg Step Two install Black Carpet + Run underseat sub wiring http://i.imgur.com/oVWuZHs.jpg Step Three install the Black leather buckets http://i.imgur.com/0RQKsW4.jpg Step four Enjoy http://i.imgur.com/etg6O42.jpg Edited July 1, 2017 by TylerHartman Link to comment Share on other sites More sharing options...
TylerHartman Posted July 1, 2017 Author Share Posted July 1, 2017 Replaced my Rear Wheel bearings, Sounds much nicer. Drivers side was pretty bad. http://i.imgur.com/CR2ywNs.jpg Also on Rockauto there's some Alloy LCA's posted for $53 so I had to buy one and make sure it was a legit Alloy arm and not a random stock photo.. So $53 Each on Rockauto get's you these Badboys. ULTRA-POWER CMS80181 & CMS80182 http://i.imgur.com/StNbNdp.jpg Link to comment Share on other sites More sharing options...
TylerHartman Posted July 14, 2017 Author Share Posted July 14, 2017 Went to a Car meet with some Subies http://i.imgur.com/F219ZCg.jpg My Friend with a EJ205 Swapped 2.5RS Snapped me a picture on the highway http://i.imgur.com/NaCh6LF.jpg Painted my Alloy Arms with Por15 to keep them from looking nasty http://i.imgur.com/fbCn61r.jpg http://i.imgur.com/uHrRhTP.jpg Also Acquired a STI Genome Front Strut brace at the Auctions, Plan to get Bilstein's and Tires in the next few weeks. Link to comment Share on other sites More sharing options...
TylerHartman Posted July 14, 2017 Author Share Posted July 14, 2017 Hung out with @thedeadhp Saturday night http://i.imgur.com/i32YTEX.jpg http://i.imgur.com/B5Jx3d5.jpg http://i.imgur.com/TbAnAHy.jpg Link to comment Share on other sites More sharing options...
TylerHartman Posted July 25, 2017 Author Share Posted July 25, 2017 Some Updates for you guys My new Facelift 08-09 Dash setup. Considering doing the 08-09 Steering column but I need to figure out how involved it'll be http://i.imgur.com/0aYMTd0.jpg Picked up this stuff this weekend for a total Steal http://i.imgur.com/4kQcz89.jpg JDM PS/ABS Cover http://i.imgur.com/iWShpFP.jpg Finally got my passenger seat all connected correctly and My airbag light went away. (05 LGT LTD seat to 06 2.5i SE) Still need to sort out the Power seat part http://i.imgur.com/KZJNYT0.jpg Some Parts came in from the land of Greatness http://i.imgur.com/yQ5IJPW.jpg Link to comment Share on other sites More sharing options...
TylerHartman Posted August 7, 2017 Author Share Posted August 7, 2017 I forgot to Upload these http://sl-i.net/FORUM/images/imported/2017/08/kq8Tewi-1.jpg http://sl-i.net/FORUM/images/imported/2017/08/8zkIgzN-1.jpg http://sl-i.net/FORUM/images/imported/2017/08/9nb1YVA-1.jpg Link to comment Share on other sites More sharing options...
TylerHartman Posted August 7, 2017 Author Share Posted August 7, 2017 Good things come to ones that wait, At least Car part wise.. I Picked this Whole 08 LGT Limited 5EAT Steering Column With Paddles for $115. Yes that's $115 Shipped to my door. Let that sink in http://sl-i.net/FORUM/images/imported/2017/08/GKr9j3y-1.jpg http://sl-i.net/FORUM/images/imported/2017/08/mDUGgVK-1.jpg http://sl-i.net/FORUM/images/imported/2017/08/0M5ZWCi-1.jpg So the Pick n Pull Yard near me just had picked up a 2010 Impreza 2.5i Premium so I went a took a Look and It had a Mint Wheel with SWC (like my 08LGT Wheel) But in almost brand new shape but the airbag was blown... So I went and picked that up and made sure it bolted up to my 05-07 Steering column. After that I Combined my 2008 LGT Rear Wheel cover with Buttons to my 2010 2.5i Wheel. Only Part I'm missing is the 08-09 Legacy or 08-14? Impreza airbag Cover. http://sl-i.net/FORUM/images/imported/2017/08/j74pSD8-1.jpg Link to comment Share on other sites More sharing options...
TylerHartman Posted August 7, 2017 Author Share Posted August 7, 2017 Parked next to an R32 Skyline at a Meet. http://sl-i.net/FORUM/images/imported/2017/08/JQZ1Dtx-1.jpg Hung out with some Legacy/Outback owners in city above me http://sl-i.net/FORUM/images/imported/2017/08/nY5T9AP-1.jpg Picked up these Audi A4 B6/B7 Endlinks for $5, Installing these this week. http://sl-i.net/FORUM/images/imported/2017/08/idBI1Kp-1.jpg Link to comment Share on other sites More sharing options...
TylerHartman Posted August 14, 2017 Author Share Posted August 14, 2017 Considering Picking up a 08-14 STI Steering Linkage/Knuckle, After that, I'm getting Tires. I have Ordered/Have the following below, Anything else you have to recommend post it below Picked the Struts, Springs and top hats off of Cincy05LGT -Bilstein HD Struts -Epic Engineering Springs -Front Spec B Top hats -Whiteline Steering Rack Bushings KSR207 -3/8 Saggy Butt Spacers -Audi B6/B7 Aluminum Endlinks for the Rear Link to comment Share on other sites More sharing options...
TylerHartman Posted August 22, 2017 Author Share Posted August 22, 2017 Got my Bushings and STI Steering Knuckle/U-Joint installed today. Wasn't too bad of a job, Would recommend lifting the car on stands instead of ramps Like I did. You need the rack to move a little bit. Ended up having my Mom just move the Steering wheel ever so slightly to get the bolt holes to line up after that it was smooth sailing. I haven't taken it on a good drive but just down the street and in the driveway I can already feel the steering is nice and more Responsive/More feedback. I love it. My Front Sway bar Bushings don't look too good and my End-links feel looser than they should be, I'll be doing the Tribeca FSB Soon. Moog or Fancy Solid Frontend links? http://i.imgur.com/wm2XCeN.jpg http://i.imgur.com/1ZPVVq8.jpg Link to comment Share on other sites More sharing options...
TylerHartman Posted September 2, 2017 Author Share Posted September 2, 2017 Some Junkyard finds! I'll be making a Crown Vic Honeycomb grille soon Installed minus the covers Plasti dipped till I get other stuff together to paint All done! Quick side update! The Steering feels Incredible after the linkage and Rack bushings Link to comment Share on other sites More sharing options...
TylerHartman Posted September 19, 2017 Author Share Posted September 19, 2017 Picked up some Hankook Ventus V2 Concepts H457 215/45R17XL's for $395 Mounted Link to comment Share on other sites More sharing options...
TylerHartman Posted September 21, 2017 Author Share Posted September 21, 2017 Found a guy on Craiglist parting out a 2008 Legacy 2.5i Limited, So I went and got some more parts 08-09 Wood Trim Door cards, the Driver's side isn't great but I can find a replacement later Heated Seat switch and Extended arm rest (Isn't perfect, but in better shape then my normal rest) Link to comment Share on other sites More sharing options...
TylerHartman Posted September 22, 2017 Author Share Posted September 22, 2017 Another Update! Tonight I Installed a 05-07 2.5GT 5EAT Sport Shift steering wheel and it plugs right in, and just works like it should. Awesome on Subaru to use the same Clock Spring and wiring setup on 2.5i's vs 2.5GT's Link to comment Share on other sites More sharing options...
TylerHartman Posted September 25, 2017 Author Share Posted September 25, 2017 Well my 1999 Legacy GT Couldn't make it to the meet due to Last min issue, So I took the Daily and well... I wasn't expecting this! I would have washed it better then a 15 min wash if I knew it stood at all chance haha. Super stoked Link to comment Share on other sites More sharing options...
TylerHartman Posted September 27, 2017 Author Share Posted September 27, 2017 Small Update! I have Aquirred 05-09 Legacy GT Front Calipers, Brackets, and Very low miles Front Pads for Cheap. Also picked up Rear EBC Yellow Pads for my 2.5i Brakes for a price I couldn't refuse. Later on I'll upgrade to the Vented 2.5GT Rear Setup but for now, this should be a solid improvement over my stock setup. I need to Order Some Blank Rotors soon and paint for the Front Brakes. I'm considering doing Stoptech SS Lines up front while I'm at it. I'll be installing my Billstein's once my Saggy butt spacers arrive. After that, I plan to get some Sway bars and possibly Endlinks. Link to comment Share on other sites More sharing options...
TylerHartman Posted October 7, 2017 Author Share Posted October 7, 2017 Won some Spec B Trailing arms for 3,400 Yen this morning. My Friend sent me some Cheap Aero Spats so I guess that's happening soon too haha, More stuff I'm getting that requires paint the more i'm considering a Rear bumper and Facelift Garnish Took a few pictures this week too Link to comment Share on other sites More sharing options...
1stick3pedals Posted October 9, 2017 Share Posted October 9, 2017 Nice build, keep up the good work! Can't see the pics on the first page, but page 2 and 3 work fine. Link to comment Share on other sites More sharing options...
thomas1657615996 Posted October 9, 2017 Share Posted October 9, 2017 Like we discussed on sli, cool build ! Link to comment Share on other sites More sharing options...
TylerHartman Posted October 18, 2017 Author Share Posted October 18, 2017 Nice build, keep up the good work! Can't see the pics on the first page, but page 2 and 3 work fine. Thanks! Sadly Photobucket ruined everything and I haven't gone thru and switched everything to Imgur. I will very soon Like we discussed on sli, cool build ! Thanks so much:) Link to comment Share on other sites More sharing options...
TylerHartman Posted October 18, 2017 Author Share Posted October 18, 2017 Picked up a GT/XT/3.0R Trunk Trim Plate and Cargo net thing for the side. Also bought SWP (37J) Paint over the weekend and prepping my Mirrors for paint. Hopefully, my JDM Spats are in soon. Link to comment Share on other sites More sharing options...
TylerHartman Posted October 20, 2017 Author Share Posted October 20, 2017 JDM Trailing arms and Upper Arms just came in today. Updated and fixed all my pictures but one post I can't find the pictures for Link to comment Share on other sites More sharing options...
TylerHartman Posted October 25, 2017 Author Share Posted October 25, 2017 I Picked up some Black Outback Cargo Walls, and Rear hatch fabric, Black Rear Seat Belts, and Rear Power Outlet. Sadly the Spare Tire cover Was missing but I did get the side parts. Getting closer to my fully Black Cabin Here's some Picture's I've forgotten to upload JDM Alloy Trailing arms 25mm FSB 05+ LGT Front Brake kit (316mm) HK Speaker system Link to comment Share on other sites More sharing options...
TylerHartman Posted October 25, 2017 Author Share Posted October 25, 2017 Ditched this stuff today Can't figure out what this plug is for, any ideas? Cargo walls installed! Plus I have the hooks for the Cargo nets and Power Socket now Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now