Xander Posted February 22, 2016 Share Posted February 22, 2016 I need stock springs for 05 legacy gt if they are taking up space in your garage email me alexcv426@yahoo.com I am in the Portland Oregon area Link to comment Share on other sites More sharing options...
shralp Posted February 22, 2016 Share Posted February 22, 2016 Don't have stockers but I do have Whiteline Control springs that were on my Rev A Legacy Bilsteins. Bought them back in the day because I wanted just slightly stiffer and slightly lower but not as radical as Swifts, Teins, H&R etc. they are 20% stiffer than stock and 30mm lower. Almost imperceptible unless you really take a close look compared to a stock Legacy. They have seen weather and really need to be media blasted and re-painted/powder coated. I'd let em go for say, $100? Running Tarmac coilovers now... Link to comment Share on other sites More sharing options...
Xander Posted February 22, 2016 Author Share Posted February 22, 2016 Appreciate the offer but I am strapped for cash right now I could do 60 if you would be able to do that I just paid a ton for the car and one of the springs is cracked figured the cheapest way to go was back to stock and I still have to pay to have them installed looks like your in portland so if you could do 60 I could pick them up today Link to comment Share on other sites More sharing options...
shralp Posted February 22, 2016 Share Posted February 22, 2016 PM sent Link to comment Share on other sites More sharing options...
Xander Posted February 22, 2016 Author Share Posted February 22, 2016 Text me at 503 341 3163 as long as the springs are in good condition I will take them thanks Link to comment Share on other sites More sharing options...
Xander Posted February 23, 2016 Author Share Posted February 23, 2016 Thank you! Ended up just putting the whole thing on the car rides great and a lot higher turns out the previous owner just cut the stock springs these are was better! Link to comment Share on other sites More sharing options...
shralp Posted February 23, 2016 Share Posted February 23, 2016 Nice! Glad to hear it worked out welcome to the forum! Lots of good folks here to answer questions as they pop up! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.