diesel4982 Posted December 11, 2015 Share Posted December 11, 2015 Hey Everyone, sorry if this seems like a stupid question....would anyone know if the 2016 horn connectors are different from the 2015? I'm trying to purchase the Subimods wiring harness (for the Hella supertones) for the 2016 legacy and they said they couldn't confirm if it were the same as the 2015. Can anyone take a picture of the horn connectors on their 2016? I don't have my car yet or else I would have done it. I really appreciate the help. Link to comment Share on other sites More sharing options...
diesel4982 Posted December 11, 2015 Author Share Posted December 11, 2015 I've also tried to search on the forum but couldn't find any clear pics, or pics specifically for a 2016. Just putting that out there. Link to comment Share on other sites More sharing options...
securityguy Posted December 11, 2015 Share Posted December 11, 2015 I can't imagine they are any different than the 2015...it's a horn connector;) Link to comment Share on other sites More sharing options...
diesel4982 Posted December 11, 2015 Author Share Posted December 11, 2015 That's what I said also. But they want to be sure. Link to comment Share on other sites More sharing options...
Grnlantern1 Posted December 11, 2015 Share Posted December 11, 2015 I've swapped out my Horns with Hella Super Tones and the Stock Horns are located in each Fender Left and Right and Have a Standard Terminal Connector.. I bought the Grimm Speed Harness and Had to extend the Trigger Wire to the Driver Side Horn.. I left the Ground Wire Harness connected to the Center Beam as intended.. http://images.tapatalk-cdn.com/15/12/11/642370e7a11e0c3fa67fda4a10cc5d72.jpghttp://images.tapatalk-cdn.com/15/12/11/d445ee1bcd256ce84ff9840c35f3b3e5.jpg Sent from my SM-N900P using Tapatalk Link to comment Share on other sites More sharing options...
diesel4982 Posted December 11, 2015 Author Share Posted December 11, 2015 grnlantern, thanks for the info! is this on a 2015 or a 2016? I thought they would be the same throughout the production of the same body....but I just want to be sure. Thanks again for the help. Link to comment Share on other sites More sharing options...
Grnlantern1 Posted December 11, 2015 Share Posted December 11, 2015 grnlantern, thanks for the info! is this on a 2015 or a 2016? I thought they would be the same throughout the production of the same body....but I just want to be sure. Thanks again for the help. This is on the 15' but I'm pretty sure the 16' will be the same since there on the same platform.. Only a Few Changes have been made on the 16'.. Sent from my SM-N900P using Tapatalk Link to comment Share on other sites More sharing options...
diesel4982 Posted December 12, 2015 Author Share Posted December 12, 2015 Unfortunately, I need a picture of the 16. Sorry guys. Link to comment Share on other sites More sharing options...
securityguy Posted December 12, 2015 Share Posted December 12, 2015 ^^^I truly believe it is identical in every way as the 15 Link to comment Share on other sites More sharing options...
Grnlantern1 Posted December 12, 2015 Share Posted December 12, 2015 Unfortunately, I need a picture of the 16. Sorry guys. I guess you will just have to Push Back your Wheel Arch Splash Guard and See unless you have the time to remove your Bumper.. Sent from my SM-N900P using Tapatalk Link to comment Share on other sites More sharing options...
diesel4982 Posted December 13, 2015 Author Share Posted December 13, 2015 Trust me, I believe the same as you guys. I don't see Subaru modifying the horn connector on the same platform...I'm just trying to do what Subimods is asking for so I can purchase the wiring harness. Link to comment Share on other sites More sharing options...
im2c0ol Posted December 13, 2015 Share Posted December 13, 2015 It should be the same as 15' there's no reason Subaru change production for the horn just 1yr. 16' Legacy Mods: 55w HID + XB35 5500k, LEDS upgrades, XB Type T Fog, 20mm SB. Custom Footwell Illiminate Kit; http://legacygt.com/forums/showthread.php/15-legacy-outback-footwell-illumination-kit-237567.html Link to comment Share on other sites More sharing options...
diesel4982 Posted December 14, 2015 Author Share Posted December 14, 2015 It should be the same as 15' there's no reason Subaru change production for the horn just 1yr. Can you take a picture of yours im2cool? Link to comment Share on other sites More sharing options...
securityguy Posted December 14, 2015 Share Posted December 14, 2015 diesel...I can understand you wanting full confirmation but out of all the things that could have been changed on a 2016, I seriously doubt it would be the connector to the horn:p Link to comment Share on other sites More sharing options...
diesel4982 Posted December 14, 2015 Author Share Posted December 14, 2015 Haha, it's not me that wants confirmation everyone. I'm sure the connections haven't changed. Subimods wants confirmation on the 2016. I guess that's understandable bc they don't want to sell something that may not be the correct fit. Link to comment Share on other sites More sharing options...
im2c0ol Posted December 14, 2015 Share Posted December 14, 2015 where's the connector locate? 16' Legacy Mods: 55w HID + XB35 5500k, LEDS upgrades, XB Type T Fog, 20mm SB. Custom Footwell Illiminate Kit; http://legacygt.com/forums/showthread.php/15-legacy-outback-footwell-illumination-kit-237567.html Link to comment Share on other sites More sharing options...
Grnlantern1 Posted December 14, 2015 Share Posted December 14, 2015 Haha, it's not me that wants confirmation everyone. I'm sure the connections haven't changed. Subimods wants confirmation on the 2016. I guess that's understandable bc they don't want to sell something that may not be the correct fit. Sounds Like Subi Mods wants you to do the Dirty work while they make the Money... Unless your going to get a Deal.. Sent from my SM-N900P using Tapatalk Link to comment Share on other sites More sharing options...
Grnlantern1 Posted December 14, 2015 Share Posted December 14, 2015 where's the connector locate? The Horn Plugs are on the Horns.. http://images.tapatalk-cdn.com/15/12/14/3fe3705c2d8ced21b26048835ee4feec.jpghttp://images.tapatalk-cdn.com/15/12/14/748e6654a654acdea2c2ba5e2233f298.jpg Sent from my SM-N900P using Tapatalk Link to comment Share on other sites More sharing options...
diesel4982 Posted December 14, 2015 Author Share Posted December 14, 2015 No, no deal here. Just trying to purchase the right harness for a 2016 and I was asked to confirm this since they haven't had a 2016 come in for the hella horns. Sounds Like Subi Mods wants you to do the Dirty work while they make the Money... Unless your going to get a Deal.. Sent from my SM-N900P using Tapatalk Link to comment Share on other sites More sharing options...
Grnlantern1 Posted December 14, 2015 Share Posted December 14, 2015 No, no deal here. Just trying to purchase the right harness for a 2016 and I was asked to confirm this since they haven't had a 2016 come in for the hella horns. Well you should just build your own.. Less of a headache and probably cheaper.. You just need some 14-16 Gauge Wire, Terminals and Route the Wire and your finished.. [emoji41] Sent from my SM-N900P using Tapatalk Link to comment Share on other sites More sharing options...
CT2015Legacy Posted December 16, 2015 Share Posted December 16, 2015 2016 and 2015 are the exact same setup. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Grnlantern1 Posted December 16, 2015 Share Posted December 16, 2015 Thanks.. I know you swapped your Grill so thanks for the update for the New Guy.. Sent from my SM-N900P using Tapatalk Link to comment Share on other sites More sharing options...
Koopenfausen Posted December 16, 2015 Share Posted December 16, 2015 2016 and 2015 are the exact same setup. Sent from my iPhone using Tapatalk A post from CT is all the confirmation I would need lol Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
diesel4982 Posted December 17, 2015 Author Share Posted December 17, 2015 2016 and 2015 are the exact same setup. CT, what bracket did you use to install the horns. I'm having such a hard time dealing with Subimods to figure this out. They keep telling me they don't have confirmation. Once you tell me which bracket you used from Subimods, I'll be able to tell them to send the same one to me. Thanks CT, and to everyone here who has helped, I really appreciate it. Link to comment Share on other sites More sharing options...
Grnlantern1 Posted December 18, 2015 Share Posted December 18, 2015 Use the Perrin Performance Horn Bracket and Flip it over and it will work fine...http://images.tapatalk-cdn.com/15/12/17/b3850bc75ac4026d551955e650ec0f24.jpghttp://images.tapatalk-cdn.com/15/12/17/c32866a24d118c4813147df382a15f43.jpg Sent from my SM-N900P using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.