namtrok Posted December 27, 2014 Share Posted December 27, 2014 95 legacy with a ej22. how off is my timing. if any?!?!? but it looks very off............... i lined the cams up and all was fine but i didnt see the mark on the crank pulley. i spun it till i lined up the crank and my cams ar at 4-5 o'clock. they should be at 12 right?? on the cranks you can see it lined up at the 0. the cams you can see the red mark, i believe thats the timing mark, there is a groove where the mark is. but when one cam lines up the other one does as well, and the crank pulley mark is about 4 o'clock http://i673.photobucket.com/albums/vv99/namtrok/photo1.jpg http://i673.photobucket.com/albums/vv99/namtrok/photo3.jpg http://i673.photobucket.com/albums/vv99/namtrok/photo2.jpg Link to comment Share on other sites More sharing options...
namtrok Posted December 27, 2014 Author Share Posted December 27, 2014 but when i look at pictures online, and look at my new crank acc pulley, it looks like the timing mark is off about 100 degrees?!?!?! Link to comment Share on other sites More sharing options...
Osei Posted December 28, 2014 Share Posted December 28, 2014 You have to use the crank sprocket, not the pulley for timing! A search here or youtube will show you the proper marks. Remember Hash marks, never the arrows O. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.