seishowtime Posted August 30, 2015 Author Share Posted August 30, 2015 I had a crack in my old red and clear JDM Taillights and it was leaking water so I decided to swap them out today for the JDM Custom Clears! Also put on some new badges. Enjoy! http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/066_zpssuqn0g91.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/067_zpsyltr7tyw.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/074_zpscwso8oci.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/073_zpslryukyzm.jpg Link to comment Share on other sites More sharing options...
SilentCool Posted October 14, 2015 Share Posted October 14, 2015 Nice build, if you don't mind me asking, what did it cost for the engine swap, including upgraded parts. Sorry if I missed that but I don't recall you mentioning the cost. Link to comment Share on other sites More sharing options...
seishowtime Posted October 15, 2015 Author Share Posted October 15, 2015 Nice build, if you don't mind me asking, what did it cost for the engine swap, including upgraded parts. Sorry if I missed that but I don't recall you mentioning the cost. For just the swap, I'd have to break it down on a spread sheet. I've only been keeping track of the total overall cost. My grand total so far though is like $26k spent with all the Miscellaneous JDM Parts and all the shipping and fees included. With the swap and just power making stuff is prolly around $14K-ish? In retrospect, I wish I wouldnt have spent the money that I did but the build is unique and does grab a lot of attention on the streets. I've still got a few things left to do so i think when it's all complete and the way I envisioned, I'll be happier overall. Link to comment Share on other sites More sharing options...
nightfire37 Posted October 19, 2015 Share Posted October 19, 2015 Just curious, where did you get your 255 from? Im saving up for the swap as you have but I do like the 207 more just for the fact that it's a small high rev engine. Â Super clean wagon dude. Love the hell out of it. Link to comment Share on other sites More sharing options...
SilentCool Posted October 20, 2015 Share Posted October 20, 2015 For just the swap, I'd have to break it down on a spread sheet. I've only been keeping track of the total overall cost. My grand total so far though is like $26k spent with all the Miscellaneous JDM Parts and all the shipping and fees included. With the swap and just power making stuff is prolly around $14K-ish? In retrospect, I wish I wouldnt have spent the money that I did but the build is unique and does grab a lot of attention on the streets. I've still got a few things left to do so i think when it's all complete and the way I envisioned, I'll be happier overall. Thanks man, I didn't foresee it costing that much but it's your car and I think everyone has the right to do what they want to their car. Again, I really like the build. [emoji106] Â Sent from my SM-G386T1 using Tapatalk Link to comment Share on other sites More sharing options...
seishowtime Posted October 20, 2015 Author Share Posted October 20, 2015 Just curious, where did you get your 255 from? Im saving up for the swap as you have but I do like the 207 more just for the fact that it's a small high rev engine.  Super clean wagon dude. Love the hell out of it. I got the EJ255 from a forester Xt. I went with the 255 so i would have a more torque down low with my tranny. I do mostly city driving and at mile high altitude. Also, the 2.0l are dogs with the A/C on in the summer in the mountains. Ive got a buddy that did a 2.0l swap on his BE5 sedan but he has a 6-speed so it handles the way the power comes on better. Link to comment Share on other sites More sharing options...
seishowtime Posted October 20, 2015 Author Share Posted October 20, 2015 Thanks man, I didn't foresee it costing that much but it's your car and I think everyone has the right to do what they want to their car. Again, I really like the build. [emoji106]  Sent from my SM-G386T1 using Tapatalk It ended up being more expensive because I bought a lot of stuff brand new and shiney. Like the Beatrush pulleys, I just over paid for bling. New intercooler, new turbo, etc etc. The build could be done much cheaper if you can source more used parts and not get all JDM crazy like me. Also, obviously if you can do the work yourself, you save a few grand right there. Getting stuff from Japan is super expensive once you add up all the broker fees and shipping costs. Thanks again and good luck with your build. Link to comment Share on other sites More sharing options...
JBisson Posted October 24, 2015 Share Posted October 24, 2015 How much did the harness merge run if you don't mind my asking?  Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
seishowtime Posted October 24, 2015 Author Share Posted October 24, 2015 How much did the harness merge run if you don't mind my asking?  Sent from my iPhone using Tapatalk I got a deal on mine but iWire was the ones who merged them together. Prices are listed here. http://www.iwireservices.com/#!subaru-harness-merging/c1kfn Link to comment Share on other sites More sharing options...
JBisson Posted October 25, 2015 Share Posted October 25, 2015 Thank you very much for that link it was very useful  Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
seishowtime Posted September 1, 2016 Author Share Posted September 1, 2016 its been a while since ive posted any updates. Things are HAPPENING!!!! trying to get the car ready for the Rocky Mountain Subaru Festival on Sept 10th. JDM Front end getting swapped, new exhaust, sti Steering rack. sneak peek at some stuff that is going on now. Look forward to more pics in the next couple weeks http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/IMG_4542_zpsjvvnyqew.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/IMG_4191_zpsp07wcryw.jpg Link to comment Share on other sites More sharing options...
Chris_McCartney Posted September 6, 2016 Share Posted September 6, 2016 Looking good! You need to get yourself the JDM interior too. :-PÂ Link to comment Share on other sites More sharing options...
seishowtime Posted September 13, 2016 Author Share Posted September 13, 2016 got the front end conversion on for the Rocky Mountain Subaru Festival. Unfortunately i did not take home another trophy because my car was parked a vendor space and was not judged for competition at the show. More photos to come in the future. http://i1291.photobucket.com/albums/b550/seishowtime/Legacy/IMG_4558_zpsymca2jo6.jpg Link to comment Share on other sites More sharing options...
kaskopf Posted September 14, 2016 Share Posted September 14, 2016 Ohhh! I need your help ...i was buld just same project like you, also i live in japan and my leggy is a jdm gt-vdc ... so, i change yesterday my "c" headlights to the "d" model, all lights working fine but the electronic adjustment system don't...where is the difference on systems, al cables is the sabe socket type abd all wire is same color on same position ...how do you do on your car? Link to comment Share on other sites More sharing options...
kaskopf Posted September 14, 2016 Share Posted September 14, 2016 host image Link to comment Share on other sites More sharing options...
kaskopf Posted September 14, 2016 Share Posted September 14, 2016 image Link to comment Share on other sites More sharing options...
rkrenicki Posted September 15, 2016 Share Posted September 15, 2016 Ohhh! I need your help ...i was buld just same project like you, also i live in japan and my leggy is a jdm gt-vdc ... so, i change yesterday my "c" headlights to the "d" model, all lights working fine but the electronic adjustment system don't...where is the difference on systems, al cables is the sabe socket type abd all wire is same color on same position ...how do you do on your car? You need to replace the leveler switch in your dash with a D-type switch. They changed the signalling between the A-C types and D-type. The switches look identical, but are not cross-compatible for some reason. Link to comment Share on other sites More sharing options...
kaskopf Posted September 15, 2016 Share Posted September 15, 2016 Its so easy hahaha...thanks! Link to comment Share on other sites More sharing options...
seishowtime Posted September 18, 2016 Author Share Posted September 18, 2016 BOOM! http://i1291.photobucket.com/albums/b550/seishowtime/Legacy/IMG_4577_zpsazbcutcz.jpg Link to comment Share on other sites More sharing options...
kaskopf Posted September 29, 2016 Share Posted September 29, 2016 thanks to all! i finish my mods...now more one gt-b rs30 in the world... Â http://i.share.pho.to/06aa8abe_l.jpeg Link to comment Share on other sites More sharing options...
kaskopf Posted September 29, 2016 Share Posted September 29, 2016 BOOM! http://i1291.photobucket.com/albums/b550/seishowtime/Legacy/IMG_4577_zpsazbcutcz.jpg thats its very nice!!! Link to comment Share on other sites More sharing options...
Jacobpockros Posted November 29, 2016 Share Posted November 29, 2016 Very clean build. Link to comment Share on other sites More sharing options...
peugoby Posted December 27, 2016 Share Posted December 27, 2016 Stunning wagon! Great build with so much attention to detail and the power to back it up. This thing is goals - great work! Link to comment Share on other sites More sharing options...
seishowtime Posted May 31, 2017 Author Share Posted May 31, 2017 Been a while but just put on some more upgrades! Blouch TD-05H 16G-XT Competition Stage 2 Clutch and STI BBS S401 RG386 wheels!!!!! http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/IMG_5207_zpswid5kvle.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/IMG_5208_zpspnc3kz3p.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/IMG_4877_zpswsfd4yi1.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/IMG_5203_zpscxsrkehj.jpg I'll have better photos up eventually Link to comment Share on other sites More sharing options...
coppertone Posted June 1, 2017 Share Posted June 1, 2017 I'm loving the wheels. 2010 2.5GT limited is for sale. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now