KJS2023

When I got my car they sent me a free zip up pull over made from recycled plastic bottles.

 

 

—————————————————

HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system,

More to come...

Thanks for the tip I will and if they move I might try zip ties if anything first. I had a 1.3 on my Maxima with out issue. Did you have the issue with the stock hose or the cool colored ones u have.

 

 

—————————————————

HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system,

More to come...

Put in the blue chrome inserts today. Behind the door handles and door jams. Then went ahead cut some MDF I ran out of black carpet a while ago ended up using some random material and I think it pops better then if I had the black.

 

 

 

Just got my car back from Excelerate Performance they installed the Nameless axleback w muffle. Sounds amazing definitely happy with it.

 

 

My high pressure radiator cap came in today

 

Lol right I was surprised how much the nuts moved. The bottom nuts that lock into my mounts stayed fine cuz of the pressure. The top nuts for keeping the hight are the ones that moved a lot. I was most worried for the coupling nut I have in the back right.

 

 

—————————————————

HPS intake, SSD Front Strut bar, Cusco Rear Strut Bar, Voxx 18” rims,

More to come...

If anyone does the 3.6 Engine Cover retro fit I did ensure you use lock tight on all the nuts and bolts. I drove it prob 15min and just about all the bolts moved on me. I re positioned them especially the bolts on top with the washers that stop the cover from going to far down so I have clearance around hoses. Now with the lock tight its solid no movement. This Friday bringing my car back to the shop to have the nameless axleback put in. I tried my best but those bolts and nuts are just so rusted and I tried to do it with out jacking the car so yeah no room for leverage.

Ohh and cant forget the STI Pedals. It was a pain to install them though the screws are just so small theres no room to work. The hardest part is the accelerator long screw that installs half way down the pedal.

 

 

My Black parts finally came in so now i have Black plastic around the switches on the dash and doors, 2017 Chrome door sills,

 

 

 

 

There’s no issue that I know of if u leave it in it’s not like your keys still in it. Side note look it up online u can prob use it a fob might be cheap.

 

 

—————————————————

HPS intake, SSD Front Strut bar, Cusco Rear Strut Bar, Voxx 18” rims,

More to come...

The dealership installed mine under the dash to the left of the pedals and then ran a wire up the a pillar to a antenna so maybe start there under the dash drivers side. If u find the unit u can prob look it up online reprogram it and buy a fob for it.

 

 

—————————————————

HPS intake, SSD Front Strut bar, Cusco Rear Strut Bar, Voxx 18” rims,

More to come...

Looks like you might be on a wire hunt to see what they did to remove the remote start might of crossed some wires

 

 

—————————————————

HPS intake, SSD Front Strut bar, Cusco Rear Strut Bar, Voxx 18” rims,

More to come...

Maybe be cool to have both cars side by side to have a look. The 3.6 cover does fit great on the 2.5. Yeah some modifying but worth it for me at least.

 

 

—————————————————

HPS intake, SSD Front Strut bar, Cusco Rear Strut Bar, Voxx 18” rims,

More to come...

I see the cover as a way to help keep the engine clean besides the looks of it of course. Might as well pop it off there’s 2 pop in style in the back and it slides towards the front to take off. Take a look at my pics to get an idea. Once you take it off just figure out what part to buy if it’s the brackets or even the rubber inserts it will be cheap. The actual cover is $80 though.

 

 

—————————————————

HPS intake, SSD Front Strut bar, Cusco Rear Strut Bar, Voxx 18” rims,

More to come...

Mine falls all the time too it seems on mine the left clip doesn’t lock in well. To fix it it’s about bending it back to where it needs to be I used a flat head while it was in position. Since then haven’t had an issue. I did order an extra one from subi with my last order if it keeps happening I’ll replace.

 

 

—————————————————

HPS intake, SSD Front Strut bar, Cusco Rear Strut Bar, Voxx 18” rims,

More to come...

Finished my engine cover mount today. Ended up getting some m6 eye bolts, quick pins, coupling bolts, and scuff plates. Then I grabbed some small awg wire with some heat shrink to connect them. The m6 bolts were key in order to keep the same mounting spot for the front right bolt. All actual hood pin sets are 1/2" so I had to piece it together. Fits snug and is high enough to not rub against any tubes or wires. Prob could of tried buying the mounts Grnlantern1 recommended and honestly the next person to try this might want to go that route being much easier I would assume. For me though I love custom projects so in the end this was fun and gives my engine a lil something extra.

 

 

today I finished my Infinity logo. Base of mdf with led smoke channels, thick plexiglass I painted on the bottom to give a little depth. Custom graphics from A1Decals.com

 

Some sites like https://www.discountedwheelwarehouse.com/Wheel_Configurator_2.cfm have the option to see rims on your car. There’s a bunch of ones out there helped me make my decision. Personally I don’t care for gold rims but then again I don’t like gold in general. I prefer silver or chrome or even gun metal.

 

 

—————————————————

HPS intake, SSD Front Strut bar, Cusco Rear Strut Bar, Voxx 18” rims,

More to come...

Yeah man I saw those that’s where I got the idea. Plus the auto dim would of been cool but I don’t like the bigger rear view mirror. Almost ordered them last night looked up the install guide and then it hit me. I don’t like the white led cuz of my blue theme and once I saw where the plugs wires went to in the diagram I new I could come up with something blue and it wouldn’t cost me a dime considering I had what I needed already. Thanks again for the door sill info I did order those and a few other items to mess with. Ordered some exhaust bolts, nuts, gasket and the nameless exhaust. Looks like there’s room to do the install without ramps.

 

 

—————————————————

HPS intake, SSD Front Strut bar, Cusco Rear Strut Bar, Voxx 18” rims,

More to come...

and at night

 

 

Decided to do something cool to my car today... I added Blue Led strips behind my side mirrors. I used the power wire for the approach mirror which I don't have. They come on the same as your dome light when you unlock the car or open the door. Tuff to take a good pick with a street light so close. You unclip the mirror with a flathead from the bottom. Hidden in the back is the plug, unwrapped it to find a white and black plug. The white plus is the one, made a jumper that went to my voltmeter and figured out Orange is pos, and Blue neg. Soldered in the light covered with heatshrink that has glue inside to make waterproof. Wrapped it all up stuck em in and they work great.

 

 

 

I think I found them the two braided cables coming off both cylinder heads. Not exactly sure though, Any help would be much appreciated.

 

Currently doing my big three upgrade and already did battery to chassis and charging wire.

 

If these two braided cables are the ones I need to upgrade what type of wire should I use?

I used 1/0 gauge for both the charging cable and battery.

 

 

Question for you would you mind taking some pics of the wire you ran from the alternator. I’ve done the other runs including an extra ground on the left of the engine but not quite sure how to install the ring for my wire in the alternator with the cap being able to close with out cutting it and I really don’t want it exposed. Side question where did you get your alternator? Do you happen to have the model # for it?

 

 

—————————————————

HPS intake, SSD Front Strut bar, Cusco Rear Strut Bar, Voxx 18” rims,

More to come...

In the battle against the rattle today I added Dynomat to the trunk lid liner. It helps a bit and luckily the trunk still can pop open. You can feel the difference in weight though when opening fully. While I was at it I went ahead and changed my license plate lights to white leds.

 

Deff a good idea doing 2 of em those slims should be nice and clear but most likely will lack a little punch w just one.

 

 

—————————————————

HPS intake, SSD Front Strut bar, Cusco Rear Strut Bar, Voxx 18” rims,

More to come...