webberjames95

Ooooo lala Sent from my iPhone using Tapatalk

Paint matching coming out nice. Off a train in Japan Sent from my iPhone using Tapatalk

This build reminds me of mine Sent from my iPhone using Tapatalk

I’m assuming you mean to trim to shape on outside of rear window. Use heat gun to form and then install inside Sent from my iPhone using Tapatalk

Pulled skirts and rear valence off a car today. It was a sedan and I thought the rear would work. Don’t care since I sold the valence already for 25$ and I paid 50$ for the whole skirt set. They’re pretty rough but I’ll work on em. Spotted today was the nicest SH fozz I’ve ever seen in real life. Sent from my iPhone using Tapatalk

Just a adhesion promoter, primer, base and clear from automotivetouchup.com. All shot out of a can but they do offer gallons and touch up pens and whatever you need. I’ve used their products on over 10 or so cars with good results Sent from my iPhone using Tapatalk

Not sold on eyelids but again easy to take on and off so I’ll keep em cuz they’re rare too As for the tire pressure monitoring It is something that anyone could buy. Check out driftdialects.com and you can pick up some. Amazon also has options. Today was rainy as hell so I was inside painting some bits. Tomorrow I am picking up some rear skirts and side skirts off a gt model wagon. I know a lot of people don’t paint them body color but I’m gonna. I am using plastic adhesion promoter and a full oem style paint kit and things are turning out great! Mirrors: Side door trim: Also the tint is coming out nice. I need to work on my technique as I have never tinted and really only watched one Mighty car Mods video on how to do it. I love me some MCM. But I have a lot of 3m tint so I will get it all done on the car eventually. Need nicer weather as I have no covered space. Sent from my iPhone using Tapatalk

Active tire pressure display Sent from my iPhone using Tapatalk

Easy to take on or off. Like them for now even though I’ve never loved eyelids on cars Sent from my iPhone using Tapatalk

Finally got them installed. Took close to 10hours total id say. Learned a lot and would do differently next time. Now trying my hand at tinting. Did just one window to see how my technique is. Will return to see how it turns out tomorrow once the bubbles dry out: Before picture: Currently painting my eyelids. Not sure if I’m gonna run them but I just might considering I don’t see them often on leggys and they are really nice. Will post pics. Tomorrow I’m gonna try my hand at painting side trims and mirrors to match body color. Full faux gt status. Car is coming out pimp. Sent from my iPhone using Tapatalk

Meow: Fogs mounted on custom brackets: Got that new jdm grill installed Sent from my iPhone using Tapatalk

Still need to mount them up but it looks so much better. Can’t wait for my other bits to show up Sent from my iPhone using Tapatalk

One did break off during shipment. Sent from my iPhone using Tapatalk

Just ordered something from Japan that’s going to be very very cool. Sent from my iPhone using Tapatalk

Easier than installing jdm fogs is taillights. Usdm mid light says subaru. Jdm one says legacy: Looks good. Dumb to install it though because the window seal makes it damn impossible to reinstall. It sucked. Took probably and hour before I nailed down the technique. Otherwise it wires up as USDM cars part. All connectors pop in. Ordered new oem shift boot for 00-2004 Subaru Legacy. Prolly should’ve ordered one for an Impreza. Have to modify. I wanted oem Quality versus some cheap crap one: 20 years will ruin leather Ran out of time today but will show it all finished later Need wheels and suspension ASAP but waiting for what I want Sent from my iPhone using Tapatalk

Yeah it’s a big job. I didn’t mount them yet. I just trimmed out the bumper openings so they would fit. I need to figure out how I am going to mount them. I will likely wire them so they both turn on simultaneously yes. Cat sighting So far I trimmed the bumper and then trimmed the jdm brackets. I need to see how other people have mounted them. I just have them sitting in there now. I had to cut the factory bumper bar as well to get them to fit. Lots of work indeed Sent from my iPhone using Tapatalk

Tons of fab to make the jdm fogs work. Got a helped. Cut bash bar to make room. Had to cut a lot of bumper out to work. Still need to make brackets or something to hold it in nicely. Sent from my iPhone using Tapatalk

Nah I’m waiting for the wheels I want to pop up locally Sent from my iPhone using Tapatalk

Oem flaps. I just want to say subaru used the dumbest clips that strip themselves in the rubber clips. Metal and plastic don’t mix. I had to cut the heads off of every screw to get the oem flaps off. Need to do a polish on the paint where they were. Gorilla flaps. Used them on all my cars and they are the best So dirty inside the fender liners too. Literally a cereal box worth of sand was behind the oem flaps. Dumb. It also rained the whole time I installed these and I got soaked. Had to take the rear wheels off to install. Typical though. Rock n roll Sent from my iPhone using Tapatalk

Lol. Sent from my iPhone using Tapatalk

Airbag light is also on now since I deleted the steering wheel one. Guess the warning light is gonna get a bulb delete when I install new bulbs in the cluster. Sent from my iPhone using Tapatalk

Got my bg5 wheel in mail today: Had to widen shroud just a little Amazing what a wheel can do to an interior: Before: After: Yes I had to ditch clockspring. So no more cruise control. But I never use that anyway. Also self canceling turn signals is gone but again I usually click those off manually. More engaging driving. This new wheel is substantially smaller. Maybe 1-1.25in less in diameter. Sent from my iPhone using Tapatalk

Yeah I need to get some bits so I’ll grab them in the future. Seem cheap and age hasn’t done them favors. This is the grill I ordered. Sent from my iPhone using Tapatalk

I ordered a more fitting jdm grill Incase this idea sucks and it turns out garbage but I’m still going along as if I didn’t. Bondoglass: Checking fitment: First skim coat of bondo. Most was sanded off. Just trying to level this bad boy out: Just primed it: I have learned a ton about fiberglass while doing this and I would do it Totally different a second time. But good to learn. Replaced these rear cargo cover catches because they were broken. Broken: Don’t have any pictures of it after but you can imagine. Waiting on parts forever it seems. International shipping is slow. So is domestic apparently

I know subaru (not as bad as Honda) has poor clear coats. I’ve seen paint fade on 2013 cars. That’s only five years. And they are PNW cars where we barely get sun. Wouldn’t want to see a car from So Cal. My paint on my wrx was peeling on the wing Sent from my iPhone using Tapatalk