webberjames95

Picked up some bugeye wrx wheels. Need some work but they were 100$ on newer tires Sent from my iPhone using Tapatalk

Where do I source polyurathane bushings for my suspension for this 98 legacy? What works in terms of compatibility with other Subaru’s like wrx? Sent from my iPhone using Tapatalk

Next time. While I was in there I see I have a torn axel boot. Might as well replace the axel if imma replace the boot Sent from my iPhone using Tapatalk

It was real wild to drive to the alignment shop. Wheel clocked 80° to go straight. Pulling both directions lol.

Did something the car actually needed finally lol. New inner and outer tie rods and boots. First side took me two hours. Second side took me 20 mins. That’s the learning experience. Also I realized I could just cut the old one in half instead of unscrewing. Think they were toasted? Just got it aligned and dang that made the world of difference. Steering so tight now. Need coils cuz my suspension clunks. Needs lot of new bushings. Bushings are fun to do tho. Tinting the car tonight Sent from my iPhone using Tapatalk

Haven’t gotten sealer yet. I read butyl tape is easy. Seems easy enough. Sent from my iPhone using Tapatalk

Honestly not hard. Takes no time at all. Just line it up and fire away Sent from my iPhone using Tapatalk

Helped Sent from my iPhone using Tapatalk

Gotta wire this thing up. Sent from my iPhone using Tapatalk

Might be the only person is the world with this spruce pearl green paint job and these fender lights Sent from my iPhone using Tapatalk

Got these little guys painted, wired up and installed. Coming at you live with this post. Just drank a beer and now I’ve grown the testicular fortitude to attempt my wing install. Let’s see how this goes Sent from my iPhone using Tapatalk

Need wheels and suspension ASAP. Struts are clunky. Gonna redo a lot of the bushings on the car. Need tie rods. Gotta install wings and some other cool bits I just got Sent from my iPhone using Tapatalk

Lol. I don’t have time. I just never sleep. That’s how u get it all done. Lol. If you look st my post times I’m posting sometimes at 3-5am lol Sent from my iPhone using Tapatalk

Quick rinse Sent from my iPhone using Tapatalk

Wing is painted and back together. Tomorrow I’ll likely install Sent from my iPhone using Tapatalk

Got the passenger side skirt installed today. Finally a break in the weather. Sent from my iPhone using Tapatalk

Generic legacy ones from a 05-09 fit perfect. Pretty sure they would out of an Impreza also. Ignore the the shifter trim and boot for now. Looking for a manual jdm one. Rare parts: Sent from my iPhone using Tapatalk

Got some oem subaru floor mats today. Makes the interior look a ton better. Makes me wish the carpets were black. Anyone dye their carpets before. Any best products? Did some googling but no definitive results. If I do it I’ll lay down a bunch of dynamat Sent from my iPhone using Tapatalk

Yes i saw that write up. It’ll help a lot when I get the wing painted. I know what you mean by removing plastic by the dash for the jdm trim install. I dont know if I’m gonna use this one now. Not very nice honestly and as cool as it would be to have the toll card slot the area around the trim is beat up so I will source a manual jdm trim cuz that cubby is nice and cool. Got my drivers side skirt installed. Scary to drill into the body of a car. But I just sent it. At least I’ll be less scared to do the wing now. I used all new clips for the side skirt. It’s really on there. Thought I might need to use 3m tape cuz I was scared to drill holes but it was easy. It’s not going anywhere. Need to get my other side on once I paint it. This thing needs Tein coils and bbs wheels asap and then I’m just gonna drive the balls off it. It needs tie rods though. It’s got side to side play. No up and down play so if i understand correctly that means it’s not the wheel bearings? Let me know Sent from my iPhone using Tapatalk

Working on fitting side skirts and trims. Need a nice day of weather soon. Also need more paint to come in haha. Need to drill out clip holes for the side skirts and attach them like the oem gt body. It looks great. Just need to source a rear valence and get my wing on. Then some wheels and I’ll be in serious business Sent from my iPhone using Tapatalk

Literally my life hahah Sent from my iPhone using Tapatalk

Workin on installing an auto console bezel into my car off a jdm car. Jdm manual cars didn’t come with toll card holder. But I got this cheap and wanted the storage space cubby. So I’m gonna make it fit. First take manual trim and cut it to fit Then trim out the auto bezel Little bit of heat and then you can conform trim to fit auto bezel Still need to glue it together but roughly should look like so: Also started painting some of my side skirt bits and small part of the wing that I finished prep work on. And this is the paint pre polished so it’s going to be way nicer than the paint on the car hahah. But it’s coming out nicely. Nervous to drill into my trunk to install the wing but enough people have done it I will figure it out. Sent from my iPhone using Tapatalk

Maybe. Mine also came from Japan so maybe Sent from my iPhone using Tapatalk

The wing? Sent from my iPhone using Tapatalk

Working on the skirts. I would get GT wheels but I’m waiting for 5x100 bbs 04 sti wheels to pop up. I’m gonna paint them in silver. I think green gold is a little too pimp for this wagon. I want a car that people will look at and think is stock. But then they look closer and see stuff like the wing and the seats and wheels and what not. An openly secretive modified look Sent from my iPhone using Tapatalk