Jump to content
LegacyGT.com

TruNoLies

Members
  • Posts

    139
  • Joined

Posts posted by TruNoLies

  1. Anyone run into mudflaps that don't cost $138? I know you get what you pay for and these are probably great quality but I'd maybe like to find a cheaper alternative.

    I've been looking at a set from rokblox ( I believe that's how it's spelled) that are cheaper and give a different look but I'm not sure if they will fit but they do fit the 10-14 Legacy

     

    Sent from my SM-G900V using Tapatalk

  2. So I'm looking to get some wheels for the spring and summer but I'm debating now on size, 18", 19" or 20".

     

    I'm in Northern NJ and there are pot holes. Should I just get the 20", be careful and accept the ride comfort it will have? I will also lower the car about 1 inch.

     

    I know it's mostly my personal preference on what to choose but why are most people not going to 20"?

     

    http://uploads.tapatalk-cdn.com/20170102/76ddcbfb72796c29789f944431ab2c06.png

     

    This person is on IG and told me his are 20" and fenders are rolled.

     

    Sent from my iPhone using Tapatalk

    Your sitting nice as it is, why go lower and bigger? I'm originally from Parsippany and I know your roads pretty good so after plows, salt, and 18 wheelers the roads can get pretty bad and the repairs to them can take forever. Just my opinion I would leave as is.

     

    Sent from my SM-G900V using Tapatalk

  3. Generally a staggered offset is not good for an AWD car. The problem comes when you have mismatched tire sizes/diameters on front/back as you'll end up destroying your centre differential.

     

    This is the same issue as when you have to replace one tire when the others are worn. The new tire will be larger diameter and you'll end up wearing out your differential.

     

    It is possible to match the tire diameters, however when running different size tires this becomes difficult thing to achieve in reality. Plus then you have to be concerned about varying wear rates over the life... and it becomes a total nightmare.

     

    Easiest solution is just to run the same rim/tire size on an AWD car.

     

    Seriously Thank You, I was feeling so bad both for myself and that the seller would get a last minute back out from me. I am sure he will understand. I can't thank you enough!

  4. Hello all, Ok here we go I have yet another question. I was talking to a guy (not in a dark ally) about some rims and tires from a lexus Is something or whatever and he said he wanted to sell me his staggered (nice) rims for $500 I quickly said yes (then that taste came in my mouth of what did I just do to myself) then realized I know nothing about fitting rims and may have just shot myself. All I know is they are the same bolt pattern BUT does that mean I can use them and will it have a negative effect on my baby? HELP!!
  5. Well, I have officially begun tuning with XRT last night due to the lack of communication from Throttle happy.

     

    What I can say is, in the short amount of time (weeks) he's been tuning the 6th gens opposed to throttle happy (years) he's already surpassing his tunes.

     

    My previous tune with throttle happy was extremely, well, throttle happy.. The car was jumpy, hyper sensitive, there wasn't much drive ability at all.

     

    My first night with XRT, he loaded a rom into my car, I drove around while he monitored the vehicle, had me pull off into a parking lot, made adjustments, and loaded an updated rom into the car.

     

    Last night there were more roms loaded into my vehicle than throttle happy has loaded in six months.

     

    As PDREALTOR has stated, there is a glorious rom that has some kinks to be worked out, but as far as acceleration it's a really really huge increase than anything I've loaded into this car before.. I'm very excited to continue working with XRT, and encourage you all to do the same.

     

    Sent from my SM-N920T using Tapatalk

    I am completely new to tuning and mods and haven't done anything yet (broke and scared but thats for another time) and was wondering do these tunes take place online or do i have to physically go and meet up with a tuner? If i must meet up can somebody suggest a god tuner in CT, Mass is cool too but will require me to wait an extra month or so.

  6. Can someone assist me in locating a good tuner in CT? I have found one location called "The Shop" but I have had a few people tell me i should stay away from there, however some people just have their own opinions and try to differ others from success. If anyone knows of this place could you please inform me of your experiences.

     

    "Remember perfection is a perspective"

  7. Can someone assist me in locating a good tuner in CT? I have found one location called the shop but I have had a few people tell me i should stay away from there, however some people just have their own opinions and try to differ others from success. If anyone knows of this place could you please inform me of your experiences.

     

    "Remember perfection is a perspective"

  8. Nameless 4 inch Single wall tip deletes with a 3.6r stock midpipe. Thanks to all that have helped me, you know who you are ;) and if anyone needs help I can answer your questions just like how a handful of guys helped me. Just message me, dont worry my reply wont be "use the search bar" :)

    https://vimeo.com/194850861

     

     

    Sent from my iPhone using Tapatalk

    Man that sounds great, No way I can stick with the single pipe!

×
×
  • Create New...

Important Information

Terms of Use