-
Posts
656 -
Joined
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Posts posted by madrig
-
-
valleylegacy member this this
Beatrush Laile Rear frame end bar
Part Number - S86103PB-RA
http://minkara.carview.co.jp/userid/219389/car/110364/1366137/parts.aspx
-
from my understansding jdm wagon do not use reinforcement beam .
just trim your beam and keep only the flat section of the aluminium beam . this is what i did .
-
i like the Prova air intake guide, i will look into that !
-
-
94010AG020JC is no airbag as you part confirm , i have 94010AG121JC that can be just and update parts number .
94010AG041JC is air bag one, if you want the oem sti fabric .
will have to double check since is long time now i have this parts numbers.
-
yes no air bag
i covered mine instead of buying it cause anyway all pillars come with the sti fabric and i wanted it black not grey , even if i respect the idea of the grey fabric from a designer point , i m sure they worked hard on the choice . Ended stripping brand new pillar to recover it .
is no point to buy the A and C pillar , you just have to recover it and put the black cap on the C pillar .
for the B pillar you can buy the airbag one or if you find a non airbag one you just have to switch the moving parts around the belt to yours and cover your pillard and use a black cap .
the D and gate pillar come in black plastic same as airbag or not .
-
Contributing where I can lol
http://i63.tinypic.com/254vc5h.jpg
the two tone color work perfectly !!
this is one of my favorite car on this forum . i should have purchased an outback !
-
when i saw this one i started thinking about converting my car to outback
-
i think that everybody want a diffuser but there is no ready option available on the market !
i wondering if there is something to start here !
-
looking good !
i saw you have the black grill , i like that .
the rear bumper look great also , it take time to be use too when you swap it , the usdm is so big , but after a while you réalise there is no way back !
i have the rear lip also but didn t really like it , but saying it on your car it grow on me .
i was thinking cutting the center section of this lip to make a kind of diffuser , i like the look of the side but i dont like that the center section stick out , i prefer the round look of the bumper
-
-
-
yes from a lhd
i bought the panel new , it was like 45 dollar . use one was more expensive with shipping !
what is expensive are the trim, what subaru call ornament" .
forget ! also need for best result cover assembly column , cause the opening in the lower panel is different due to the column that extend for 2008 and tilt for 2006 .
-
i just realise you can use the bracket from your front clip , even is rh drive should be the same parts , also the shifter boot !
-
Everything you see in the pictures is what I was told and learned that you need to install it. I will let you know if there is anything further. These parts are actually for the LHD EDM 07 3.0R Spec B. So I was told it is a direct fitment to our USDM LHD cars. I wasn't aware if we needed to get the glove box as well. Ill find out once I get around to installing it.
it will fit with usdm glove box and under steering trim . of course from a 2008.
everything is bolt on , only the brackets of the center console are différent,nothing serious .
-
man...this thing...after all the wait time and back orders on parts, I nearly paid over $600 for source everything needed for a bolt on install.
I can find them again but it's just costly if you wanna go that route. It was a combination of Bahrain, Germany, Sweden, Israel to get these parts.
Not to mention over 2-3 months of searching. But I do have access to get them
ye the scrapyard from Israël was helpful for me also !!
sub for a great built !
-
-
that very cool , but i m afraid of the shipping cost !!
you should consider the option to recover your own seat , finding a local uphosltery shop , the tissue is available on ebay .
i have a friend that have a roll of bride fabric , 10 years ago is was popular to see people redoing seat and headliner with bride fabric !
-
-
-
Are they louder?
now people respect me
-
the best jdm part that i swapped on my car was the horns!
-
the first four pictures are amazing !!
-
looking very good !!
would love to have this front on my wagon !
JDM Rear Bumper for BP Wagon
in Fourth Generation Legacy (2005 - 2009)
Posted
the beam does not show on japan cars exploded view?
we should ask Singapour menber , i forget is name , or Australian members to get under they cars !