madrig

http://legacygt.com/forums/showthread.php/telescoping-steering-wheel-column-retrofit-05-07i-72055p5.html?t=72055&page=5&highlight=steering+column

from this thread , UNCLEMAT , the 08 column is only 5 mm longer !

i didn think measuring mine when i take it out ! stupid me !

so custom column will be!

post #50

plug is subwoofer .

These are different

 

I like them

https://buyee.jp/item/yahoo/auction/g238990222

with the matching rear .

nice interior mod ! that very clean .

do you have the cup holder in the arm rest also ?

https://www.youtube.com/watch?time_continue=51&v=Rm-Fee3-qdc

my first understanding was that the airbag can deploy , at any moment, in the same manner it will do in an accident .

but in fact is maybe the inflator that explode , like a bomb .

Man, nice find!! I checked on eBay but could only find full seatbelt assemblies for $100++. Part diagrams show the seatbelt assembly as one part number as well... It would be awesome to get these, seems unlikely though. I think the part is the same for 2006-2011 as well.

seat belt are always sold as a complete unit . yes 06 11 look similar also i saw accord .

i think you have to know a scrapyard so he will give you good price understanding what you will use only from the assembly !

now i doubt many peoples will go the trouble to convert all this .

if you find the right side i can send you the left !!

by pure coincidence i find Honda Civic 12 15 have similar seat belt hanger !

they will fit from what i see , i didn t install but you can not find more similar !

so this is an alternative to the jdm seat belt that are maybe more difficult to find .

i can not confirm wish civic have the black seat belt but tis dont come from a special model like SI . it was a regular four doors but i dont know what trim .

pics, black one Civic , beige one Legacy GT .

What kind of guard do you have on your bumper?

it s an extension to match the wide fenders . it s still in carbon cause it s not finish , its was never blended to the bumper .

so cool !

nice to see it almost done . great built !

if you swap all this you will have also to swap the panels trim !!

cover steering column are bigger so i dont think it will fit with the 05 06 lower steering panel .

an other problem would be the wiring .

from what i saw the wiring on the 2006 is not so loose to extend . it can be possible if you untape all and strech a little . can not be sure a this point .

one solution will be to extend the the wiring , using the wiring from the 2008 .

bottom left 2008

2006

2008

extension

IGNITION STEERING LOCK ASSEMBLY

you can swap your , simply unscrew the round head bolt with a punch and hammer , is not very hard . replace bolts with #83140GA000.

2008 lock .

The first thing that i noticed when i removed the steering was the diameter of the end column .

2006 is a smaller diameter than 2008 .

so will have to swap COMBINATION BODY-SWITCH ASSEMBLY and STEERING ROLL CONNECTOR

one issue is that the tubing diameter of the 2008 column is bigger , cause the add of the mechanism to be able to extend .

so the issue is the interaxial distance of fixation hole is different .

i didn t mesure exactly unfortunately .

so have to find a solution for that .

one option will be to swap BEAM COMPLETE-STEERING (#50801AG02A9P for 2006 ) (#50801AG05A9P for 2008)

2008 measure

IF SOMEBODY IS SELLING A DASH BEAM 08 09 PLEASE PM

the bottom of the column look kind different but is the same diameter .

the 2006 on the right seat on the bushing horn part# 34361AG000 .the end of the column is metal rounded and seat directly on the bushing that is inserted ont he firewall .

the 2008 have white bushing ,the metal end is not round , but i dont see this part on the diagram.

the diagram give only BUSHING-HORN #34361AG010 ( look same kind as 2006)

IF YOU HAVEA 2008 2009 PLEASE POST PICS SO WE CAN COMPARE HOW IT SEAT ON THE FIREWALL

from what i see there is no problem here the withe collar can seat on the horn bushing .

Awesome!

I re-re-reread the thread, but what did you use to cover the headliner and sunblind pieces?

I'm deciding on reusing the non sunroof fabric, brushed black fabric or an oe charcoal alcantara...

Did you wrap the blind handle? Looks carbon like

For my convo, I'm using a prefl adm tbSTi non sunroof wagon interior to postfl sunroof gt spec b.

Hopefully all I'll need will be to dye or wrap my headliner and blind, and the my12+ sti sunroof switch with the seatbelt led mod.

Re the latter, how did you get such clean cuts for the led convo? Dremel???

i covered with a oem kind fabric that match subaru .there is divers suppliers that have access to oem fabric style .the problem is to get it is very expensive and stock are limited , so not easy to get same one each time . i had expereince in the past from sample and you can receive something different .also the fabric i used was very difficult to work with . it look good in pictures but is not satisfactory .

i re covered the pillar also with the same fabric , for the headliner i had to add a foam .

i contacted a manufacturer of headliner that look very good , way cheaper and many colors available . will post info soon .

i recomend that you find a fabric made for headliner , as you will need something that are more stretchable .was talking with this company ,http://www.daleys.com.au/products/view/412 , you can ask for samples .

the sun shade handle is carbon , i made a mold of the original since is not available in black .

to cut the sti map light i use diamond tool on pneumatic die grinder and some hand sanding . dremel will be perfect .

Since Photobucket has taken a dump on "hosting" it's member's photos and allowing them to link them, please consider loading your photos directly from Pb to the Legacygt.com site server, using Manage Attachments.

 

How-to walk-through is the first post on the Home Page. It's fast, easy, and your pictures are visible to our members.

this is very sad for peoples using photobucket, but maybe we should thanks them for reminbering us that internet is the wilde west and we should be carrefull the way we use it !

Whoa. Your interior is awesome. Was that radio and trim a canadian option. Sorry no help on your issue.

thanks! just the european trim , same as jdm .oem subaru radio also .

The start of the carbon fiber engine bay.

 

Prova Carbon Intake Duct

50130 TR 0000

 

http://i672.photobucket.com/albums/vv87/JoshEAllen/IMG_5402.jpg

this parts is build to fit on the oem air box ? it is a copy of the oem parts ?

from what i saw on google i think not !

i m starting this thread but will update later , as i m frustrated for now , i fail !

is not often this day that i have the chance to work on my car and this was not easy as i was thinking !

the reason for swaping the column is to have the steering closer to you for a better driving position , this apply to me and is different for everybody , but usually taller people will want that .

05 06 column have a tilt ajustment and 08 09 have tilt and extension .

maybe one of many other reason why you should shop for an 2008 up legacy !

so i will devellop in this thread , the difference between and the work needed to succeed . from what i saw is not impossible .

also if somebody already did it please share here .

Impressive! Looking forward to the finished product, but I really appreciate the detailed process.

not so easy to take pics of it , i m not Professional on that !