Opie

PCV Connector, it is P/N: 11821AA260

 

With a little special something...
A JDM Spec 2000 Subaru Legacy B4 RSK, 5-spd manual with EJ208 Twin Turbo
280HP/253 ft/lbs of goodness...all original. Picked it up yesterday.

Option #3

 

Getting into the HPDE hobby should be done in your current car. Just be sure the brakes and tires are better than 50%

 

Your first few events will be learning lots of things that modifications or upgrades will diminish. Learn the lines, braking and acceleration zones and get confident in a stock car, then transition with small mods at a time. Don't add another mod until you've learned to get the most out of the previous one.

 

And be warned...track days are a rabbit hole...but they are oh so fun.

Sold the 3.6R today, took off all the fun parts first so I'll be selling lots soon.

If a glass shop and/or dealership installs a non-factory glass on an Eyesight equipped vehicle and the Eyesight system fails to perform properly resulting in an accident, that shop or dealership with be liable.

 

Why take the chance?

Purchased 2015 Legacy new June 2015

Replace windshield for a crack with no obvious chip/reason August 2015

May 2015 Replaced windshield is cracked for no apparent reason. Dealer says it is a stone chip, and will not cover under warranty.

 

2 windshields in less than 2 years? I know there is a documented problem, has anyone else had experience getting their dealer to take responsibility?

 

Appreciate any information or others experiences. Thank You.

 

The dealership has no responsibility except to perform warranty repairs on your vehicle. The warranty only covers defects in materials or workmanship.

 

Considering the windshield is impacted daily by everything from sand, dirt, wood chips, pebbles and rocks at speeds up to at least highway speeds, it should not be surprising that they get chipped and/or cracked regularly. These are all called outside influences and are NOT a defect.

there is still the autobox problem. Until Subaru comes out with a auto that can handle over 300hp/tq, all this engine speculation is just that.

 

The current HT-CVT can handle the power, if it is properly cooled. Which it is not in any of it's current applications.

^ lemon laws apply to any car that is still under manufacturer warranty and depending upon when they bought their car, they may still be under that warranty.

 

Not true, it is not tied to the warranty at all. Each state has their own rules and people should check with their states Attorney General to see what qualifies as a lemon in their state.

 

In Florida, a "Lemon" can only be claimed within the first 24 months after the date of purchase.

buy reinforcements for the mounting points. With the 20mm bar you will bend the stock mounting points if you use the twisty roads aggressively. I installed the AVD ones as you can see here:

 

http://i298.photobucket.com/albums/mm273/anhyeuemmaimai/legacy%201.jpg

 

I auto-x & track my car....aggressively...never bent any sway bar mounts or brackets...

Haven't participated in awhile...how about last nights driveway pic...

http://www.challengepromotions.com/Wills/chinBRZ.jpg

Great article on brake fluid replacement: https://www.cars.com/articles/how-often-do-i-need-to-change-my-brake-fluid-1420680336417/

Install it with the car on the ground, plenty of room, very easy to do.

Ride's just like factory with the OEM 20mm rear bar

Japanparts now offers 2 axle-back exhaust options for the 2015 & newer 2.5 Legacy's;

 

Fujitsubo AUTHORIZE S(350-64102) - $472.00

Kakimoto Racing : Class KR - $480.00

Already posted here: http://legacygt.com/forums/showthread.php/mirrorlink-239249p2.html

Can anyone confirm or deny if the OEM engine cover on the 3.6R still fits with the Takeda intake?

You have to go custom. I had a y-pipe welded and hangers installed on the right side. That and 2 MagnaFlow cost me 600 from a local shophttp://uploads.tapatalk-cdn.com/20161130/21223a4d6fb2fc73c8595de539712d34.jpg

 

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

Any pictures of the setup underneath the car? How does it sound? Part numbers of mufflers & tips used?

CVT Transmission Cooler for Legacy 3.6R (May fit 2.5i as well), parts available from your local dealer:

 

CVT Cooler - 45510AL00A - Qty Needed: 1

CVT Cooler Hose-In - 45520AL00A - Qty Needed: 1

CVT Cooler Hose-Out - 45520AL01A - Qty Needed: 1

CVT Fluid Pipe - 45522AL00A - Qty Needed: 1

Flange Bolt - 010008160 - Qty Needed: 3

Hose Clamp - 909170062 - Qty Needed: 4

Crush Gasket - 806914120 - Qty Needed: 1

High Torque CVT Fluid - Qty needed: 1-2 quarts

Install walk through HERE!

 

Same CVT Cooler as found on the Outback, similar design as found on the JDM Only, STI inspired, Forester XT/TS. Keep the tranny cool during track days or spirited driving.

Michelin Pilot Sport A/S3's here too

There is an additional, and separate harness in the headliner for the Homelink mirror. It is usually taped to the main harness with blue tape, that is what the H501SSG010 plugs into. You don't need anything additional.

http://www.challengepromotions.com/Wills/Owned/XV,36R,25RS,FXT.jpg

Next up, picture of your Legacy at a sporting event, your choice...football, hockey, baseball, golf, whatever!

That would be incriminating for some of us

 

This is why I won't show a pic under the shelf in the trunk

Or how about what you store in the compartments of that foam tray where the spare tire is kept?

 

http://www.challengepromotions.com/Wills/Legacy/Tray.JPG

 

Washed....just in time for a tropical depression to hit...