-
Posts
2,037 -
Joined
Content Type
Profiles
Forums
Gallery
Everything posted by psucaptainkickass
-
Cooling Fan Relay Issue now a recall campaign
psucaptainkickass replied to Opie's topic in Warranty Issues & Problems
Good point...I am just an advocate of the if it ain't broke...don't fix it. I wouldn't want the new part to some how mess with the ECU. If I Unmarry the AP from the car...I am going to get a whole bunch of CELs aren't I...(running Stg. 2 hardware) -
Cooling Fan Relay Issue now a recall campaign
psucaptainkickass replied to Opie's topic in Warranty Issues & Problems
Wait...so replacing the relay is a precaution? My car is in the VIN range, but I don't have the fan problem whatsoever. Flashed to Stg. 2...which from what I read isn't a problem if the fan isn't running. So what they'll do is replace the relay, so that it won't short the ECM circuit in the future? It hasn't for a year and a half...likely that it will short it now? -
Shifter Surround or Bezel Gap: READ THIS
psucaptainkickass replied to LegGTLT's topic in Warranty Issues & Problems
Huge resurrection update! my last post was in July, needless to say the gap was still there, and got slightly worse. Today I installed the 06 headunit I grabbed off ebay..worked like a charm! I don't know if it is the design of the radio, the plastic trim I took off, no clue, but when I put everything back together the gap was GONE....and I pushed on it a bit and it is nice and firm there. I got mp3 capability and FINALLLLY got rid of the gap...!!! -
STOP! Go out to NAPA or Kragen, or something like that (not Home Depot, they don't carry it) and get some PB Blaster. SOAK those flanges. Even then it took me some strength the first time, but just take a wrench and latch it on the bolt head, and take another wrench and latch on the nut side, and then squeeeeeeze. It will come off. You probably should go to Sears and get some sockets though, it will make your life a lot easier.
-
Ok, don't take this the wrong way, but how many MR CBE plugs is this site going to have? Its like, everytime someone is like, oh I want something nice, something quiet, the MR CBE Leprechan shows up and is like, get in this GB. I just want to point out, that this isn't directed at you, and that I appreciate you letting me know that spot #16 is available, but the fact is, I know about the MR GB, and I am sure the CBE is a quality piece, but I don't like the tips or the fitment of the tips with the stock bumper, which is why I have not responded to that thread. Sorry ahead of time if this offends anyone, it wasn't meant to.
-
Went back to stock this weekend when I put the Cusco RSB in, and yes, the car is back to being quiet. For some reason...I think I like it better. Yes, it is harder to tell when I press the gas pedal, and yes, it doesn't sound mean as all hell, but when the car is quiet inside I can hear the sweet sounds of the turbo and it really sounds nice. Another issue is the soot. When putting the RSB in, I got crap all over me, luckily I had gloves on, but I just don't think it is a great thing in the long run to have crap all under the car. I think this was a good way to represent what a CBE will sound like, and I think I really would like something quieter than the Hog, with less of a rumble, more of a purr. And as a joke, I was going to post up my washers for sale in the marketplace, complete with pictures..but I was tired, and just threw them out
-
DRL disable just got a whole lot more complicated. Thanks Subaru for changing something that really didn't need to be changed.
-
Well, I've had the mod for like 2 months now...6 weeks driving time (was gone for vacation for two weeks). I love the sound for sure. I have noticed though, that I am getting some soot related discolorations underneath. It isn't much. The flanges are black...which I think is expected. The undercoating under the gas tank definitely is getting darker (only around the area around the flanges). Does anyone know if this will harm anything? I don't care if it turns black, I just don't know if soot eats away at anything though, which is my primary concern. If it does, I don't mind buttoning it up...it will just give me more motivation to get a full cat back
-
In talking with MIKEBRAVO this weekend about the hog-mod, he brought up something that another member noticed. Anyone have soot around the area that is modded? I am not talking around the flange only, but around the general area? Mine has been hog-modded for about 2 weeks now, and I haven't had time to look under and check, but I just want to know if anyone else has noticed anything. An accumulation of soot underneath the car is enough for me to close it up until I can get a CBE.
-
Shifter Surround or Bezel Gap: READ THIS
psucaptainkickass replied to LegGTLT's topic in Warranty Issues & Problems
Just want to point out, that while the gap was taken care of...it is no longer completely flush..I can see the tab.. It looks like I am going to have to take care of this one myself. -
Shifter Surround or Bezel Gap: READ THIS
psucaptainkickass replied to LegGTLT's topic in Warranty Issues & Problems
Go to another dealer if you can. There are also a list of dealers here that have fixed the problem, tell the dealer to call them to verify. If that doesn't work, ask for the regional reps name and number, and if they don't give it to you, call SOA directly. Its bullshit that the dealer is giving you the runaround. If you need to show them that it is the side panel that needs to be replace. Push on it, toward the console, you should see the plastic bezel move up to where it should be. Another name to that dealer list. Service Manager Mike at Kearny Mesa Subaru in San Diego. -
Shifter Surround or Bezel Gap: READ THIS
psucaptainkickass replied to LegGTLT's topic in Warranty Issues & Problems
You might as well go get it fixed sometime. It's easy for the dealer when you do all the research for them! What I really want to know is what causes the problem...we all had "new" panels at some point, and then something along the way caused them to deform or not fit right, I wonder what that could be. -
Shifter Surround or Bezel Gap: READ THIS
psucaptainkickass replied to LegGTLT's topic in Warranty Issues & Problems
I know right, there is no give up when it comes to dealing with the man...grrrr... -
Shifter Surround or Bezel Gap: READ THIS
psucaptainkickass replied to LegGTLT's topic in Warranty Issues & Problems
FIXORED!!!!!!! Finally!!!!! After waiting an astonishing 5 WEEKS for the part, I took it in today and the gap is gone! Oh and I don't think there was a redesign in the part, its just the right side trim. For whatever reason it was bent, mis aligned, had flex in it..I don't know, but you just need a new part to line up correctly. '05s have it, '06s, can't wait to see if the '07s have this problem too.