94legacy22
Members-
Posts
137 -
Joined
Content Type
Profiles
Forums
Gallery
Everything posted by 94legacy22
-
A/c evaporator temp probe
94legacy22 replied to 94legacy22's topic in First Generation Legacy (1989 - 1993)
-
A/c evaporator temp probe
94legacy22 replied to 94legacy22's topic in First Generation Legacy (1989 - 1993)
-
In search of a new a/c temp sensor/ relay. Discontinued from Subaru. If any has a lead for one. Part number 83071-AA030. Thanks. For my 94 legacy. First gen.
-
1993 Subaru Legacy L, 95K miles 1 Owner
94legacy22 replied to Biometrics's topic in Legacy Photos (2004 and older)
ive had my 94 for 12 years now, love it. need to find front fenders and have the rear quarter panels done. new england rust get them. -
Check knock sensor for cracking dirty throttle body, also purge valve stuck open. You can use a purge valve from a second gen legacy. That’s what I have in my 94 when it went bad.
-
Haven’t posted in a while, I had given my old Subaru to my dad. Just had to do headgaskets on it. Left side was leaking coolant into cylinders. 6 hours to pull engine. Replace headgaskets and head bolts and clean it up. Installed a new clutch while in there. Back to running good again!! Sent from my iPhone using Tapatalk
-
I've had a vibration in my front end since I got my subie, I've done tires, rim swaps balanced the crap out of the tires done front axles/ checked all joints and still had a vibration. I have lived with it for about 30k miles. well this past weekend I did front pads and rotors and now I can actually drive at 75-80 with out any vibration!! come to find out it was the rotors that weren't balanced!!!! thanks to meineke for putting on the last set from the previous owner. I would never recommend using there crap of brakes ever!! I installed a new set from advance autoparts there silver line. so far no issues I've gone about 250 miles so far. cost threw my work about $75 for them
-
upgrading the stock speakers!!! jl audio 6.3/4. components. soon to come 4 channel memphis amp and 10 inch sub. tweeters are going in stock 2nd gen pannels. i'll make em fit. also grabbed the stock front bass speaker mounts from a 2nd gen too. and while i was there i picked up a rear sway bar and the drop down brackets too hook up all came from a 98 outback.
-
mine wasnt hooked up when i bought it. sooo i spent 45 minutes finding new nuts to hook it up only to find out the clutch petal felt like a king cobra mustang clutch petal after i was done. so i disconnected it again. and I am alot happier with it disconnected.( so is my left leg):spin:you dont need it anyway