95LEGOBW

Hi, Thanks for the really great write up. I was following it, along with the pictures, and I believe I have a suggestion for a correction. Step 9 says, "Now flip over the Unit and undo the clips". Those words are correct, but the accompanying image is not. The image shows, circled in red, two clips which go over the brown tabs on the edge of the circuit board. The two clips that should be circled are just to the outside of the two circled in the picture. The correct ones are black, and small, but show in the picture. When the two black clips are released, the plastic piece to which they are attached can be pulled UP (not back), revealing the circuit board and the bases for the light bulbs. Worked for me, YMMV. Thanks again for the helpful write-up and great pictures. BTW, like several others here, I also found it quite easy to release the heater cable from down by the passenger footwell, rather than from the back of the control unit.