legacy360

This http://i275.photobucket.com/albums/jj314/floppsbigfeet89/IMG_0274.jpg

Thanks, but the car belongs to someone else now

Awesome compilation of information, thanks!

Looks good, I see they finally decided to paint the mirror covers on the base model

So then is it possible to replace the clamps without removing the axle and losing a lot of grease? Sorry for the stupid question.

So my passenger side CV boot is leaking grease as of sometime this last week. I'd much rather rebuild/repair the seal then purchase the entire axle assembly. Would it be best to purchase all the necessary parts from a dealer or purchasing a rebuilt kit from Napa, Oreily's, etc? Looking to try to get this fixed this weekend.

I never noticed a loss in power or torque, but it doesn't mean it didn't happen.

Base model

Good to know that I wasn't going nuts seeing the reveal with the AVO grille on my car. But for $70 and a quick coat of paint, I will run it for awhile.

Here's my 2010 with a 3" Magnaflow CBE [ame=http://www.youtube.com/watch?v=ffm2jeBgIKk]YouTube - 2010 Legacy 2.5i Magnaflow Exhuast[/ame]

Yes, after a couple weeks of driving i will be looking to get a resonator installed. Shouldn't be to complicated since the mid-pipe comes apart in sections. Though it's amazing that you can actually hear your exhaust now

[ame=http://www.youtube.com/watch?v=ffm2jeBgIKk]YouTube - 2010 Legacy 2.5i Magnaflow Exhuast[/ame]

I will believe you're done when you can make it to the end of june before changing out again. Good to hear you like the sound too!

Hard to tell that my car is a base model from the outside anymore only the well trained eye will notice the mirror caps aren't body color

Yup, here's a pic of what it looked like brand new. http://i275.photobucket.com/albums/jj314/floppsbigfeet89/S7300190.jpg

Nope, no tuning done.

No problems with the ordering process. All of their orders are drop shipped from Magnaflow in Cali. It was only 4 days for ground shipping for free. Haven't had a chance to take it on the freeways much, but will get some good drive time in this week.

Added in car driving clips

Edited the orginal post and added a link to the website I bought it from. And yes it is a 3" cbe. I think a lot of the noise is due to the lack of a resonator in the mid pipe.

Thanks! It's the Magnaflow cat back exhaust. Fitment is pretty good and I can now actually hear my exhaust while driving

Ok I figured I would just start a new thread for this instead of having in parts of different threads. I bought the new Magnaflow Cat Back Exhaust for a 2010 Legacy GT and installed it on my 2.5i. (Note I was only able to do this because my car had the exhaust hangers on the passenger side already. Not all 2.5i models have them.) The part # is 16377. EDIT: This is a 3" catback that goes to 2.5" at the Y. I purchased it from www.performancepeddler.com The installation was a pretty simple process. Remove the OEM muffler(s) and mid-pipe to prep for the new kit. Since I didn’t have a lift it was a pain in the @ss to get the donut gasket connection loose/reconnected. Make sure all the pieces are loosely fited before tightening anything down. The kit has 3 band clamps, 1 - 3” and 2 - 2.5”. In order to get the exhaust onto the hangers I found it helpful to spray some WD40 on the hanger and the rubber hanger. The instructions say to tighten the clamps to approx 40 ft/lbs, which is pretty much when they are compressed completely. Also the donut gasket is recommended to be torque to 13.3 ft/lbs (from Subaru service manual). I purchased a couple of poly hanger bushings from Rallitek for the passenger side of the car. About $5 each. Picture of OEM 2.5i mid-pipe next to Magnaflow mid-pipe Installed on the car 3” to 2.5” y-split Videos - (the clicking noise is coming from my camera, not the car, time to get a new one) Outside car startup [ame=http://www.youtube.com/watch?v=ffm2jeBgIKk]YouTube - 2010 Legacy 2.5i Magnaflow Exhuast[/ame] Inside car Startup [ame=http://www.youtube.com/watch?v=asyMQP_2dTo]YouTube - 2010 Legacy Magnaflow Catback[/ame] Driving Clips [ame=http://www.youtube.com/watch?v=XH7s-jhJsn8]YouTube - Inside Car Exhaust Clips[/ame] Edited to upload pics directly to forum.

http://i275.photobucket.com/albums/jj314/floppsbigfeet89/PICT0233.jpg http://i275.photobucket.com/albums/jj314/floppsbigfeet89/PICT0218.jpg http://i275.photobucket.com/albums/jj314/floppsbigfeet89/PICT0224.jpg http://i275.photobucket.com/albums/jj314/floppsbigfeet89/20110408201909.jpg

Nice wagon, congrats!

He needs to blackout those headlights

Looks great, Waz's wheels work really well with your car.