Hepy117

I will start this list out. I don't know if we want to update the first post or how we want it to be done. Model year: C - 2012 Build date: *have to get* Model and trim level: Legacy, Limited, hk audio, moonroof Factory-fitted HU model number: PE627U1 *will get P/N Which camera wires HU: 11, 12, 13, 14 Which camera wires trunk: 6, 7, 8, 9

Edit: nevermind i see its the camera plug. So to make sure I am correct, all I need is either the oem camera, hook it up to that plug and then ground pin 8 at the HU, or get an aftermarket camera, use pins 6-9 and also ground pin 8 at the HU?

Checked mine today. Mine has the wires in the trunk and attached to the headunit. Does anyone know what the little white plug on the same harness is for?

Mine was built april 2013, HK system with sunroof. Im in MD right now for work. Killing me not being able to walk out and look

Yep i ended up pming him and talked to him bout the 13 lip. I didnt want to keep mudding up this thread

Hmm im going to have to pull my Hu out and also pull the carpet off the trunk to see if i have these. I wont be able to get to it for at least a week. Sorry

Ok just so im understanding... Camera red goes to 14, camera white goes to 11, camera black goes to 12, and 8 just needs to be grounded. For 13 there is a shielded black that goes to that?

I192... Is that a connector thats connected to the back of the HU?

Wow this is looking all foreign to me. Haha. Guess i need to take a gander at the wiring diagram so see all of this

He has the ebay one. http://pages.ebay.com/motors/link/?nav=item.view&id=370730205909&alt=web

Maybe sw686blue?

Digging up an old thread. I thought I would get everyone up to speed on my Rear Camera install. I purchased a Rydeen Miny Camera and a PE658U1. I made a harness for the power wires and rca connector using the factory pins. I installed the factory style pins into the factory connector 8,11-14. Ran the wire to the passenger side and through the floor to the back. I ran it through the trunk grommet and into the trunk. I cutout the plastic where the factory camera goes with a dremel tool. I mounted the camera at the factory location and fired it up. Everything works perfectly! I THEN Hooked up my PE627U1 Stereo for giggles to see if that would work. I can 100% confirm that IT DOES in fact work with the camera. Looks great and only took me about 2 hours from start to finish. What an easy install. I am a little bummed that I bought the PE658 because I really dont need it. If anyone has a stock stereo and wants to upgrade to a 4.3" with camera capabilities, I have one for sale. I will try to do an informal writeup in the next few days with some pictures. P.S. The camera cost me $40.00 on Ebay new, anyone with a 4.3" without a camera can do this mod for no more than $50, and make it well worth it. So for a 2012 with the PE627U1, i just need a camera, and then make a harness?

Possibility he's back for the next game (july 1 @ 4pm est)

What i did was just hook up my clear fuel line that i boight with a bottle attached to catch the fluid to the clutch bleeder valve, opened the valve and then pumped the clutch, closed valve, repeat, to get most of the fluid out. Then disconnected the damper and did the install. Now I did get air in the system, but i didnt take the time to fully bleed the system and had to re-bleed. This was my first time doing a "clutch job". Would I do it differently? Yes, i would take the time to bleed the clutch with a full bottle of fluids to make sure everything was out. But at least i didnt have a mess inside the car

I found a butt on the undertray of my spec b after someone flicked a butt out the window on the highway. Luckily it didnt catch anything on fire

re-bled. Everything is kosher. Must have had some air in the line.

Yeah i noticed the reservoir can go empty very quickly. Im going to rebleed this weekend. Hopefully the gf can help me out in getting it done

Never heard it before the delete? Almost seems like the clutch is trying to catch up with the pedal input

Lifeguarding? Or swimming?

Mines not a squeal. Hard to explain. Almost like a vibration sound. But only does it with rpm's above 3k ans if i push in the clutch quickly

Anyone getting a weird noise after install >3k rpm when clutch gets depressed rapidly? I think i need to rebleed my clutch

Yep cool kids only ;-)

Thats whh its fathers day n not mothers day ;-)

i just got a weber. i love it!

At least it wasnt dirty ;-)