decided to take apart my glove box light tonight..
Pull out storage cubby above glove box, it just pulls right out. after you do that, remove the white connector the two hooks circled in red in picture 2 hold the glove box light in place, push those in and pry upwards on the places i circled in red in picture #1. if you rush this and break a snap, the black piece that holds the light is 66242AG06A. Don't ask how I know the part number. once you remove the glove box light assembly, it'll look like #3. you can just unhook the black piece that holds the light in place, and you can pry off the cover on the opposite side of the connector. once you unhook the cover, you will see what is shown in picture 4. apparently after you remove the door, theres nothing holding the circuit board in the plastic housing and it'll just fall out. once you take the circuit board out, or once it falls out onto your floor, you'll see what is shown in picture 5.