-
Posts
53 -
Joined
Content Type
Profiles
Forums
Gallery
Everything posted by hatchd
-
i have everything ordered and plan on installing it all at once
-
its a version 2 i would like a version 3 since they no longer support the v2 but thank you for the heads up
-
fs - location: Cobb V2-003 Seattle $300
hatchd replied to tuck16's topic in Member Classifieds (2010 - 2014)
is this still available? -
i dont know much about the service history it looks like whoever had it before me took really good care of it. i got a 3/36k warranty on it for that reason lol. i look forward to blowing it up and taking advantage of the warranty to replace it with some better go fast parts. i cant figure out how to get pictures to upload on here or i would post pics of it. i have the top mount, ic piping, invida down pipe, invidia n1 exhaust, samco turbo inlet, perrin top mount coupler, and an ap3 on the way for it already. i have already done basic maintance stuff changed all the fluids and i put the power stop front and rear brakes on it with slotted and cross drilled rotors on it as well. i also put an oddyssy battery in it with 830 cca for a small stereo build i plan on doing. its going to be a fun daily im not looking to do anything crazy right now with it.
-
I want to buy a cobb ap3 sub-003 for a 2011 legacy gt
-
I got some bad new and then some great news all in a couple of hours a few weeks ago. I had a 2011 legacy 2.5i that i bought brand new in 2011 when i bought it there only had 3 legacy gt's left in the country at the time and no dealer would dealer trade them so i settled for the 2.5i at the time. I traded my 04 STI in on it and missed the car everyday since lol. Fast forward to a week ago a lady without insurance and without a license ran into me and totaled my legacy but lucky for me i work for a dealership and fate have it they just took in a 2011 legacy gt in on trade only a couple hours before the accident. I was able to pick the car up that day and drive it home and im in love all over again! I have already ordered a bunch of stuff for it and look forward to the build ahead.
-
New to Forum. Wheel & Tire Question
hatchd replied to Jax62812's topic in Fifth Generation Legacy (2010 - 2014 )
i have run a couple different setup on my 2011 legacy. I have the eibach pro kit springs and with them i ran a 245/35R20 with zero rubbing and about and 1/8" of clearance before it would start to hit the strut in the front. I have also run a 245/45R18 with the same springs and you have a ton of room with those. -
-
Official Steel Silver Metallic Thread (2010)
hatchd replied to Tide's topic in Legacy Photos (2010 - 2014)
ok I figured it out. Its a 245/35R20 on a 20x7.5 45mm offset with an eiabach pro kit and factory shocks -
Official Steel Silver Metallic Thread (2010)
hatchd replied to Tide's topic in Legacy Photos (2010 - 2014)
Did that work? -
Official Steel Silver Metallic Thread (2010)
hatchd replied to Tide's topic in Legacy Photos (2010 - 2014)
http://http://s53.photobucket.com/user/st1cbon1/library/ -
Official Steel Silver Metallic Thread (2010)
hatchd replied to Tide's topic in Legacy Photos (2010 - 2014)
So I finally broke down and put a larger rim on the car. I had 245/45R18's on it and I wanted something bigger to fill the wheel well. I did an eibach pro kit to lower the car but it still wasn't enough so I put a 245/35R20 on it. The only problem is I suck with computers and I cant figure out how to post the picture lol. The car looks amazing in my opinion and I could not be happier with how it turned out. So if you can help a noob out and tell me what I need to do to post a pic I would like to show you guys and get your opinion. -
Official Steel Silver Metallic Thread (2010)
hatchd replied to Tide's topic in Legacy Photos (2010 - 2014)
look on tireracks website at brimmer craft not sure on the spelling i pick up wheels that look the samw for 109 a rim in a 18x809opp -
Official Steel Silver Metallic Thread (2010)
hatchd replied to Tide's topic in Legacy Photos (2010 - 2014)
45mm is what i was told -
Official Steel Silver Metallic Thread (2010)
hatchd replied to Tide's topic in Legacy Photos (2010 - 2014)
Here are a couple pictures of the what I did on my day off this week. I will try and get better pictures when I can I would like to do a mini photo shoot in the next couple of days/weeks -
Official Steel Silver Metallic Thread (2010)
hatchd replied to Tide's topic in Legacy Photos (2010 - 2014)
no issues at all i still have 2 inches of clearance on the inner fender well -
Official Steel Silver Metallic Thread (2010)
hatchd replied to Tide's topic in Legacy Photos (2010 - 2014)
here are a couple new pic of the car with the wheels installed. i got a good deal on them so i couldnt pass them up its a 18x8 with a 245/45/18 and eibach pro springs installed -
Official Steel Silver Metallic Thread (2010)
hatchd replied to Tide's topic in Legacy Photos (2010 - 2014)
I have a buddy in town that does window tint, clear bra and wraps for a living and he owed me for hooking him up on some tires so i didnt pay a thing. It took him about 2 hours to do everything while we shot the shit and im sure he could have finished it faster if I wasnt there talking to him the whole time. He buys it in a roll so i dont know how much it would cost he said if i was paying he would have charge 100 bucks for the trim and the grill. he is trying to talk me into using the carbon fiber on the hood, roof and trunk he did a couple lambo's and a few other high end sports cars and it looks sick but i think i'm going to stick with the matte black theme if i do it at all -
Official Steel Silver Metallic Thread (2010)
hatchd replied to Tide's topic in Legacy Photos (2010 - 2014)
no its 3m matte black vinyl, same stuff the guy above used that looks carbon fiber I just wanted matte black instead -
Official Steel Silver Metallic Thread (2010)
hatchd replied to Tide's topic in Legacy Photos (2010 - 2014)
-
Official 5th Generation Suspension Thread
hatchd replied to DeltaSniper's topic in Fifth Generation Legacy (2010 - 2014 )
I just wanted to confirm that the Eibach Pro Kit for the 2011 LGT will work with the 2.5i. I'm not sure why but Eibach said its not compatiable so I ordered it anyway and everything fix perfect. The car is sitting right where I wanted it to and still rides like factory. I will post pics soon. Thanks, Hatch'd -
Official Steel Silver Metallic Thread (2010)
hatchd replied to Tide's topic in Legacy Photos (2010 - 2014)