blklgt05

Just got an update from Swift. The first batch is on the ocean from Japan and will be here shortly. There's only 10 sets made for this 1st batch and I will either make new thread or update the current one when I get more info about how to acquire them. -Gary

plz post installation pictures/instructions, thank you!

This guy on s-tech is the lowest I've seen.

are u sure its not KCA 326??

Same here, I bottomed out hard twice at this spot right after exiting the fwy near my place on the OEM springs. I purposely drove over it after getting Swifts and it was smooth. I braced for it right before and my face was like , then afterwards, it was .

I go over 9 speed bumps from my home to work, and 9 speed bumps back home.

Me, run them straight over at slight faster speed than OEM springs without getting sea sick.

yeah let me know cuz I might get the camber bushings before I get wheels. If you look closely, there's a 2 finger wheel gap in the front & rear for the Swift. Swift's drop is f1.3"/r1.15" and Swift does not sag due to material. On the Swift, the rear wheel gaps are just a tiny bit more than the front, but the overall drop of the car is perfectly even. http://i154.photobucket.com/albums/s253/blklgt05/10LGT/th_1front.jpghttp://i154.photobucket.com/albums/s253/blklgt05/10LGT/th_1rear.jpghttp://i154.photobucket.com/albums/s253/blklgt05/10LGT/th_P5193170c.jpg The Teins do drops a lot more than Swift though if that's what you're going for. Tein s-tech drops f1.8"/r1.6" +regular break-in sag.

Quick side comparisons of what we have so far... @DeltaSniper, have you experienced any rubbing issues so far? I'm thinking about the 19x8.5+45 w/ 245/40/19 ranged spec. Thx!! -Gary

Car looks sexy man! Time to drop it a little! Get low and smooth with Swifts!!

Save you some time, this is the correct badge. I decide to buy it and keep the original emblem on the grille so it will be easier to sell later on. You will need to add more 3M HD mounting tape + silicone to mount it to the grille. Btw, RBS's grille will need to be modified to fit properly, you'll see. I also recommend you lower the hood rubber stops down all the way and add a long piece of insulating foam (from home depot) between the grille and the bumper.

RBS Grille by Rommel, it was a limited run...

Thanks, but I'm sure ur KW V3+Swift Springs is even nicer! I wrote a review about it HERE.

RalliTek HD Endlinks Subaru 19mm RSB SWIFT Sport Springs http://i154.photobucket.com/albums/s253/blklgt05/10LGT/P5233234.jpghttp://i154.photobucket.com/albums/s253/blklgt05/10LGT/P5193170c.jpg

Can someone suggest a good alignment place in SD area?

get a cherrybomb glasspack!

Borla CBE is 2.5", so I dont think the sounds is going to be deeper than magnaflow.

siick man! how much was it and where did you get it from? is it a 3" cbe??

only if they can prove that the exhaust is the cause of certain failure, but you should always get the car properly tuned no matter what.

get outta here! we don't like u kinds posting things we cant have!

nice!!!! ive been waiting for this thread forever, looks like ill be busy this... wait, nba all star... hmm... NEXT WEEKEND!!!!

It fits okay after you stuff some foam between the bumper and the grille + re-drilling the holes. Mike (msprank) did it for me and it sits much better now. This is the only option other than grilletech which charge you about the same, but you have to use your oem grille, saw the wings off yourself, install the mesh, and paint it yourself. So, RBS grille is actually a much cheaper option. I don't know if he still have any in stock, based on what he tells me, he's been busy with his new career and doesn't seem to be interested in making any more of them.

http://i154.photobucket.com/albums/s253/blklgt05/10LGT/2010LGTLtdMediocreThis.jpg

video updates?

since its a V6 and you are fabricating everything... why not go twin turbo? you can also make true dual exhausts :eek: