Phillyballs79

Yeh, It’s a manual, so no extra grommets. Fender liner will be the first thing I rip into next time I get enough daylight to finally finish this. It was like 29 degrees and windy on Sunday, I restrained myself from trying to get those friction clips off the liner with numb hands. Lol, I would have broke every one of them! Thanks for the knowledge, I will post a pic when it’s done this weekend. I’m using the indoor time to make a nice plexi amp/processor mounting rack.

I replaced my factory HU with an Android HU ($199 Atoto 7" A6pf on amazon) was skeptical at first but was suprised how good it was for price. Wireless carplay, SWcontrol built in no adapter necissary, just 1 wire and ground. I have the factory sub that sounded like crap until the higher wattage from this brought it to life. door sppeakers/ tweeters are twice as loud as well. cubby modification was hardest part, mine is an 08. If you have a '10+ they make the kit w vents to go right in. I had a good experience with this, lots of people hate on them. If you are not looking for reference level sound, this is almost a 1 stop solution. hope this helps.

Thanks! So I failed at attempt #1.. First I tried the big wire loom on the passenger side, I made a small slit and fished some 14 ga thhn in. was super tight but i made it, never getting 0ga in there without possibly damaging wires in that harness. then i started scoping out the driver side footwell you suggested. there is an unused grommet with a cover that is the perfect size above the door wire boot. i tried fishing same wire through and it seems to be landing inside a void in the sheet metal. after getting my hand stuck up in there like some kind of bear trap and freezing my ass off, i threw in the towel for the day. My question to you is, behind the fender liner (which i didnt remove yet) is there a better view / path to the inside? If thats the case im sure this will be wayy easier and will be able to use a proper grommet. Im too old and slightly wiser to take chances with 150+ amps and a rub through! lol! thanks again for your help!

Im doing the same this weekend, havnt looked for a good spot yet. is this fender grommet big enough to get a 0 gauge wire through? i bought a small 2k watt amp to drive 3 8's. was trying to keep things small, but this 'small' amp needs 1.21 gigawatts and a big 3. (dont shop on amazon while drinking) no buyers regret, its gonna be amazing but i made lots of extra work for myself..lol thanks in advance