Jump to content
LegacyGT.com

1stTurbo

Members
  • Posts

    11
  • Joined

Personal Information

  • Car
    Legacy gt

1stTurbo's Achievements

Rookie

Rookie (2/14)

  • One Year In
  • Collaborator
  • First Post
  • Dedicated Rare
  • Conversation Starter

Recent Badges

0

Reputation

  1. No need to worry, I’m getting it professionally evacuated and recharged.
  2. Definitely jumped the gun on the fan, but I’ve tested the compressor and even tried to correctly space the clutch and what not
  3. I replaced the fan so either way it shouldn’t be the fan, I will check out the ac high pressure switch but where should I go from there if that’s not it? I’ve determined the compressor clutch doesn’t kick in as well so I’m likely going to replace that
  4. I believe the ac blowing hot is due to the compressor clutch, so unrelated. The main problem is the passenger side ac condenser fan that is mounted to the radiator doesn’t come on. The driver side one does.
  5. Not sure when or for why the passenger side radiator mounted condenser fan is supposed to come on but as long as I’ve owned my car it hasn’t. Today I replaced my radiator assembly and the passenger side fan and after observing it for a good hour while bleeding the system, the radiator driver side fan comes on after a few cycles at operating temp, but not once did the passenger side condenser fan come on. Is this a common issue or has anyone dealt with this before? Please let me know I’d rather not just keep throwing parts at it lol. Possibly related when I ran the heat to bleed the system one vent side came on reallll hot and the other side maybe a lukewarm not even, a/c doesn’t blow very cold either, I have a condenser I’m getting put in professionally as I don’t have a machine but thought I’d include this detail. Radiator replacement went well though and the car does not over heat.
  6. Yeah I had them sent from Japan to a guy at vivid optics, a custom headlight company, he did the conversion for the turn signal and drl as well as conversion for the main hid harness. He’s gonna try and help me fix it but yes when the high beam indicator on the dash and the column is not set on, only the side beams turn on, and when the brights are flicked on it only comes on full blast
  7. Ok I did that and the only light that comes on other than turn signals or the beams is the middle bulb at full blast only when I turn on the brights. Is this normal or? Innermost bulbs have yet to ever come on and the low beams out of the circle middle part bulb flicker when the drl is plugged in but basically only what seems to be high beams come on when the drl is unplugged.
  8. Been having this problem for awhile that I can live with but don’t necessarily want to. My 5eat’s gearbox will shift into the S sport mode but if anything barely hits a bump or whatever it will just ever so slightly move I guess and the sports signal on the dash goes off. I can button shift manual mode just fine but the manual sports stick shift mode doesn’t work right and the dang thing just won’t stay in sports mode unless I’m holding it there. If anyone’s encountered this problem and knows how to fix it would be super appreciated if you could help, think it might be a sensor or even some debris maybe not letting the stick rest there, either way would be very cool if I could get some experienced insight. Thanks.
  9. So I purchased these hid headlights from Japan and had them sent to a guy to do the drl and turn signal stuff, everything including the main bulbs plug in just fine and the drl and turn signal work great, problem is I’m getting flickering with the hids where they’ll maybe flicker for a minute when first turned on and then they turn off all together, I’m thinking of just getting different aftermarket hids with a balancer kit and seeing if that works but I’m not sure it’ll plug in right to the whole thing, if y’all know a fix or balancer that’ll just plug right in that would help greatly, I’ve also found some info that leads me to believe if I disable the drl, the hid main headlights may work but I’ve yet to try. Someone smarter please reply and let me know thanks!
  10. Installing some bucket seats and just wondering which of these wires I have to plug these 3.3 ohm 2 watt resistors into airbag, just don’t want any of those lights to come on and I can’t play with it by turning car off and on right now (05 legacy gt) also will turning the car on while the sensors are unplugged make the airbags go off?
×
×
  • Create New...

Important Information

Terms of Use