SuperhawkLGT Posted March 20, 2012 Share Posted March 20, 2012 Need to buy these asap and can't seem to find the part numbers. Anyone have them or sell the top hats to me, thanks. Link to comment Share on other sites More sharing options...
SuperhawkLGT Posted March 20, 2012 Author Share Posted March 20, 2012 Yup, what Mike said is true. However I would strongly suggest replacing the strut tops in the front as we have seen most of them wear out in about 80k miles of driving. -mike http://www.pbase.com/paisan/image/91072632.jpghttp://www.pbase.com/paisan/image/141039922.jpg http://www.pbase.com/paisan/image/133406601.jpg http://upload.pbase.com/image/137566671.jpg We carry almost every manufacturer now, so before you buy parts call us. AIM: AZP Installs | E-mail: paisan@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber "Race Tested, Enthusiast Approved!" Found some just want to make sure they are correct. Number 20 here, will I need more than that or is that all and reuse the stock stuff? Link to comment Share on other sites More sharing options...
Jim_KT Posted March 24, 2012 Share Posted March 24, 2012 I ordered new OEM tophats for my 2005 LGT. My originals' bearings were no bueno. 20320AG00A If you care to buy new spring seats the P/N is 20323AG00B. Link to comment Share on other sites More sharing options...
elwood Posted March 30, 2012 Share Posted March 30, 2012 Bump. My UPS man just left me some of these (PN 20320AG00A), but they look quite a bit different from the originals. The 3 studs line up ok, but the old dust caps no longer fit tight. Is anyone aware of a redesign/update? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.