What else should get changed out with installation of Koni/Epic Spring?

[06_lgt_mi]

Thanks to a couple of the sponsors on the forum (Infamous Performance and Eurosport Design) I just ordered the Koni strut inserts and Epic spring combo that I keep reading so many good things about. My question is what else should I plan to replace when I am in there? I know sway bars will help and those will come in the future, and I have heard that it is recommended to change out the top hats on at least the front struts. But is there anything else I should add like new control arm bushings or the anti dive kit or anything?

 

Oh and all this is going on a 2006 Legacy GT 5spd with just over 92000 miles.

[AZP Installs]

If you are going with the lowering springs, you should think about the Roll Center Kit from Whiteline (which we well, hint hint) as well as the Front inner and hockey puck bushings. With an 06, they are likely shot at this point and the rck will help to realign the geometry in a lowered car.

 

-mike

 

http://www.pbase.com/paisan/image/91072632.jpghttp://www.pbase.com/paisan/image/141039922.jpg http://www.pbase.com/paisan/image/133406601.jpg http://upload.pbase.com/image/137566671.jpg

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.

Call directly as We carry almost every manufacturer now, so before you buy parts call us.

AIM: AZP Installs | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber

"Race Tested, Enthusiast Approved!"

[06_lgt_mi]

How much would those run shipped to zip code 48105?