beeda Posted July 21, 2011 Share Posted July 21, 2011 I have a bh first off. I'm running 17's (48 offset) with h&r lowering springs, and a brand new pair of black McGard lugs. Can i use some 5mm wheel spacers with stock wheel studs? Link to comment Share on other sites More sharing options...
Guigz Posted July 21, 2011 Share Posted July 21, 2011 I have a BH running JDM B4 wheels (17 with 53 of offset), and i am running 5mm spacers on my stock lug nuts and its okay. Link to comment Share on other sites More sharing options...
WESTcoast Posted July 21, 2011 Share Posted July 21, 2011 you can run up to 10mm and after that its a safety factor. Link to comment Share on other sites More sharing options...
beeda Posted July 22, 2011 Author Share Posted July 22, 2011 I thought if you ran bigger than 5mm your wheel bearing were shot? Link to comment Share on other sites More sharing options...
dubunderpar Posted July 22, 2011 Share Posted July 22, 2011 ^nope, I have been running 5mm spacers for a long time with no wheel bearing issues. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.