Hanger Posted July 9, 2011 Share Posted July 9, 2011 So I got this metal revolving noise after some suspension and brake pads installed coming from my driver side front. The noise is low when I drive slow, but picks up rapidly as I accelerate. I've done some research online and found that the noise might be coming from a bent dust shield grinding on the back of the rotor. Hopefully you guys can provide me some insights on what/how to check what's wrong. I'm gonna go and jack up the car and see Any help is appreciated! -Michael ○ ○ ○ Instagram: itshangertime :spin: ○ ○ ○ Link to comment Share on other sites More sharing options...
Hanger Posted July 9, 2011 Author Share Posted July 9, 2011 w00t i took care of it. Turned the wheel to see where the dust shield and rotor are touching and bent the shield back fixed the problem. ○ ○ ○ Instagram: itshangertime :spin: ○ ○ ○ Link to comment Share on other sites More sharing options...
xero287 Posted July 10, 2011 Share Posted July 10, 2011 +1 wish i saw this earlier because it happened to me too a while back so i could have helped you Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.