LegacyMUN2k6 Posted January 27, 2009 Share Posted January 27, 2009 How do we replace the glove box bulb?! Link to comment Share on other sites More sharing options...
RustyShackleford Posted January 27, 2009 Share Posted January 27, 2009 Does anyone know of a brighter upgrade for the DE3175 map/dome lights? I found something here... http://www.eautoworks.com/html/ORD-1-1-1-33261.cfm ...but I refuse to buy from anyone who makes claims like: LED light travels faster and farther then any ordinary automotive light. Yeah, I saw that too - what a moron ! I made my map lights way brighte simply by removing the lens/cover thing. It's mostly opague, with a very small hole for the light to shine though. I want to figure out how to enlarge this hole cleanly ... Link to comment Share on other sites More sharing options...
pre-dent Posted January 28, 2009 Share Posted January 28, 2009 Quick question regarding bulbs. I need to replace the bulbs that illuminate the license plate, but I cant figure out how to get to them. I've tried prying the lenses off from the outside, but I'm afraid to try too hard and crack something in the sub-30 degree weather here. What is the correct way to replace those bulbs? Link to comment Share on other sites More sharing options...
RustyShackleford Posted January 28, 2009 Share Posted January 28, 2009 Quick question regarding bulbs. I need to replace the bulbs that illuminate the license plate, but I cant figure out how to get to them. I've tried prying the lenses off from the outside, but I'm afraid to try too hard and crack something in the sub-30 degree weather here. What is the correct way to replace those bulbs? On mine you remove two screws and pull the assembly out, THEN remove the lens. You might want to put a detailed spec of your car (include year and trim type) so it shows up on your profile ... Link to comment Share on other sites More sharing options...
sportwagon Posted January 30, 2009 Share Posted January 30, 2009 I replaced the bulbs for the license plate in my 05 GT sedan by pullling back the carpeted trim on the inside of the trunk/hatch and gaining access to the bulb from the inside! Link to comment Share on other sites More sharing options...
pre-dent Posted January 30, 2009 Share Posted January 30, 2009 Okay I updated my car and location in my profile. In the owners manual it shows how to do it on the wagon, which is indeed as easy as two screws. But on my sedan there are no screws holding the lenses and they will not (even with moderate force) pry out like typical lenses. Looks like I will try to go behind the interior trunk panel to access the bulbs. Thanks. Link to comment Share on other sites More sharing options...
sportwagon Posted January 30, 2009 Share Posted January 30, 2009 de nada Link to comment Share on other sites More sharing options...
underpowerd Posted February 14, 2009 Share Posted February 14, 2009 How do we replace the glove box bulb?! i found out the other day that it isn't a bulb, but rather an led integrated onto a circuit board. that didn't stop me the circuit board is independent, and just clips into the harness. i just busted out the old soldering iron and transferred the pins from the board to a #74 5-led bulb from autolumination so that at least two of the leds would light on one side, then widened the holes on both the brown led board casing and the top of the glovebox that let light through. it took me through a 15w fuse or two to get the right polarity finally, but the result is great -- actual bright white light to see what's in the glovebox . http://i174.photobucket.com/albums/w102/duluoz_01/IMG_0161.jpg http://i174.photobucket.com/albums/w102/duluoz_01/IMG_0160.jpg http://i174.photobucket.com/albums/w102/duluoz_01/IMG_0159.jpg fwiw, the cubby pod has the exact same led + cicuit board setup -- i did a much simpler swap on that; i just replaced the orange led with a spare red one i had laying around (just clip and re-solder). result is a cool little red accent behind the gauges that much better jives with the predominantly red 'night' interior scheme. you can also see the ashtray replacement in a few of these -- that is actually just a true #74 bulb that needs a swapout for led i wouldn't say this is plug-and-play, but with a little fab, imagination and common sense, doable in many different ways, even for an electrical invalid like myself a good time is when you are going to tear it all down for cabin filter enjoy. http://i174.photobucket.com/albums/w102/duluoz_01/IMG_0165.jpg http://i174.photobucket.com/albums/w102/duluoz_01/IMG_0162.jpg http://i174.photobucket.com/albums/w102/duluoz_01/IMG_0163.jpg http://i174.photobucket.com/albums/w102/duluoz_01/IMG_0164.jpg Link to comment Share on other sites More sharing options...
TSiWRX Posted February 15, 2009 Share Posted February 15, 2009 ^ Cool glovebox mod! <-- I love Winky, my "periwinkle" (ABP) LGT! - Allen / Usual Suspect "DumboRAT" / One of the Three Stooges '16 Outback, '16 WRX, 7th Subaru Family Link to comment Share on other sites More sharing options...
underpowerd Posted February 15, 2009 Share Posted February 15, 2009 thanks hope it helps some! Link to comment Share on other sites More sharing options...
DarkOblivion000 Posted March 19, 2009 Share Posted March 19, 2009 Very nice... now I have a weird and difficult question... Does anyone know if there is a integrated circuit board full of LEDs for all the panels in the front? Like let's say... I wanted to replace ALL the red lighting in my car with blue... HOW difficult would that be?? Link to comment Share on other sites More sharing options...
2009Legz Posted June 3, 2009 Share Posted June 3, 2009 hey i wanted to know if these are the correct bulbs for a 2009 legacy also? please let me know asap Link to comment Share on other sites More sharing options...
Yayo Posted August 30, 2010 Share Posted August 30, 2010 didn't want to start a new thread, so hopefully someone sees this... whats the bulb size for the Vanity Sun Visor bulb? It's not in my Owner's Manual, and I can't find it online. =( Link to comment Share on other sites More sharing options...
t0lkman Posted January 2, 2011 Share Posted January 2, 2011 Couldn't find, what bulb size is used for glove box? Link to comment Share on other sites More sharing options...
apexi Posted February 20, 2011 Share Posted February 20, 2011 (edited) decided to take apart my glove box light tonight.. Pull out storage cubby above glove box, it just pulls right out. after you do that, remove the white connectorthe two hooks circled in red in picture 2 hold the glove box light in place, push those in and pry upwards on the places i circled in red in picture #1. if you rush this and break a snap, the black piece that holds the light is 66242AG06A. Don't ask how I know the part number.once you remove the glove box light assembly, it'll look like #3. you can just unhook the black piece that holds the light in place, and you can pry off the cover on the opposite side of the connector.once you unhook the cover, you will see what is shown in picture 4. apparently after you remove the door, theres nothing holding the circuit board in the plastic housing and it'll just fall out.once you take the circuit board out, or once it falls out onto your floor, you'll see what is shown in picture 5. Edited February 27, 2011 by apexi changed some pictures Link to comment Share on other sites More sharing options...
1454 Posted May 16, 2011 Share Posted May 16, 2011 Geez people, read. I already posted up a kickass site that has every LED need you could ever imagine. http://superlumination.com/festoon.htm I just placed an order with this guy, and his customer service before hand rocked. I emailed him a couple of questions about his dome lights and he responded in 2 mins. Literally. my email went out at 11:20 he responded at 11:22. I haven't received the product yet, obviously because I just got done placing the order, but based on the preceding events I have no reason to think I would have an issue. Link to comment Share on other sites More sharing options...
Sublove Posted June 12, 2012 Share Posted June 12, 2012 Anyone have any info on the lighting around the shifter? I've got an auto '06 legacy and the lights on the base of the shifter for park through drive etc... have gone out. Going to be taking control panel apart to get to the CD player and though I may be able to resolve that issue at the same time. Link to comment Share on other sites More sharing options...
04caliwrx Posted November 26, 2012 Share Posted November 26, 2012 man i have been looking around forever for this!! so my 05 is a h7! Link to comment Share on other sites More sharing options...
JMLegacy Posted December 2, 2012 Share Posted December 2, 2012 (edited) How do you change the ceiling light (door light) ? Do I pull on the front of the clear part to get it off, or what? EDIT: Found it. Dome light - Pry the end (clear end) with a screw driver (page 11-55 of my manual) Edited December 2, 2012 by JMLegacy Link to comment Share on other sites More sharing options...
dahoseman Posted December 28, 2013 Share Posted December 28, 2013 I installed these multi-plug LED's in all of the dome lights. They're awesome. [ame=http://www.amazon.com/gp/product/B00FKPJJNY/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1]Cutequeen Trading 2PCS White 5050 48SMD 48-SMD LED Panel Dome Light Lamp + T10 BA9S Festoon Adapter (pack of 2) : Amazon.com : Automotive[/ame] Link to comment Share on other sites More sharing options...
jp928 Posted December 29, 2013 Share Posted December 29, 2013 The big 48 units will fit in the dome light housing (in a wagon) ok ? Doesnt look like much clearance between the cover and the festoon clips to me.. tks jp 08 gtb 6mt wagon Link to comment Share on other sites More sharing options...
2-Ton Posted April 26, 2014 Share Posted April 26, 2014 Ok so I need help with these dam Festoons. What sizes can be used in my 2007 legacy gt auto wagon? What is the stock size of the festoons? what size of festoon can you go up to? I am looking to replace my map, dome, and wagon cargo dome lights. But this festoon thing has me worried. Can I use dif sizes to a degree? if so how much? These are the ones I am looking at, can you suggest others? http://www.dx.com/p/festoon-31mm-3w-210lm-1-x-epistar-white-light-car-auto-reading-lamp-12v-2-pcs-261170#.U1sbO1cl8yo http://www.dx.com/p/t10-ba9s-festoon-31mm-42mm-5w-600lm-48-x-smd-5630-led-warm-white-car-interior-dome-light-12v-266872#.U1sbN1cl8yo http://www.carid.com/2007-subaru-legacy-bulbs/ I was looking at the ones here but there are soooo many of them.... dont really know what to go with. Anyone willing to share there LED experience with me? Link to comment Share on other sites More sharing options...
FoxyRed Posted June 3, 2014 Share Posted June 3, 2014 bulb guide for 97 gtb legacy ? Link to comment Share on other sites More sharing options...
yepez13 Posted January 22, 2015 Share Posted January 22, 2015 where can i purchase all the interior led lights?? dont want to buy them one by one lol Link to comment Share on other sites More sharing options...
wuuusaa Posted January 23, 2015 Share Posted January 23, 2015 ^^ The site listed above. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now