AK Wagon Posted December 31, 2007 Share Posted December 31, 2007 Before everyone points out the thread on this same page I am looking for instructions to install a new pump into the legacy housing, not the preinstalled pump housing kit. Any direction would be appreciated. Link to comment Share on other sites More sharing options...
AKLGT Posted December 31, 2007 Share Posted December 31, 2007 This was posted back in the day by TDC Tuning (Jon). However, still good instructions and I think it'd still apply to what you're trying to do: http://www.legacygt.com/forums/showthread.php?t=38929&highlight=fuel+pump Wiggle wiggle wiggle wiggle wiggle yeah!!! Link to comment Share on other sites More sharing options...
pegleg Posted December 31, 2007 Share Posted December 31, 2007 I installed a walbro pump into the housing using that ^^^ writeup, but I found that I ran into a pressure loss problem, after reading that link, read my post at the end of the other fuel pump install thread and you might be able to avoid taking your fuel pump in and out multiple times trying to solve the pressure loss problem. Pm me if you have questions. http://www.legacygt.com/forums/showthread.php?t=52202&page=2 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.