Box1813 Posted September 20, 2007 Share Posted September 20, 2007 I've done the research: I know the LGT swaybars fit the OB just fine with stock hardware. Now, I know the swaybar will be on my car by the end of the year. If I get the MR coilovers and drop the car down will this mess with the swaybars? Do I need adjustable endlinks? (I'm planning on going as low as I can without rubbing) Link to comment Share on other sites More sharing options...
dasbigunit Posted September 20, 2007 Share Posted September 20, 2007 I've gone to cobb sways front and rear, with the stock endlinks on MR OB Coilovers with no problem. If you want to drop the car as low as possible, I would get the regular coilovers (ones for the LGT) the body is shorter and will allow the car to be dropped more (although you may need alignment aids afterwards...) Link to comment Share on other sites More sharing options...
Box1813 Posted September 21, 2007 Author Share Posted September 21, 2007 Alignment aids? The stock setup doesn't have enough adjustability to go to LGT ride height? Can the OBXT go to LGT height without tire issues? Link to comment Share on other sites More sharing options...
dasbigunit Posted September 21, 2007 Share Posted September 21, 2007 sorry, i'm super lazy to retype, but similar information is here: Outback XT to Legacy GT Thread: http://www.legacygt.com/forums/showthread.php?t=70465 -Ed Link to comment Share on other sites More sharing options...
Box1813 Posted September 21, 2007 Author Share Posted September 21, 2007 Thanx. Mods please delete this post. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.